The 13Gbps Gigabit Ethernet switch IP core contains eight 10/100/1000 Mbps Ethernet ports and two 10/100/1000/2500 Mbps ports. The switch IP core supports TCAM-based VLAN classification and translation with pattern matching against Layer 2 through Layer 4 information including MAC addresses, VLAN tag headers, EtherType, DSCP, IP addresses, and TCP/UDP ports and ranges. VLAN translation can be processed on ingress and/or egress. Multicast entries are stored in a shared 8K MAC address table. The switch IP core supports wire-speed, hardware-based learning, and CPU-based software learning that is configurable per port. Secure CPU-based learning is an available option. The switch IP core deliverables include a comprehensive application programming interface (API).
Features
8× 10/100/1000 Mbps Ethernet ports
2× 10/100/1000/2500 Mbps Ethernet ports
2 Mb of integrated shared packet memory (configurable)
Gigabit Ethernet (GMII/RGMII/SGMII/MII) to uP connection capable
Fully nonblocking wire-speed switching performance for all frame sizes
Eight QoS classes
Advanced QoS and security available through a multistage TCAM engine
Quality of service per port and per QoS class
Dual leaky bucket policers with policing per ingress port, priority, and ACL filtering
Static and dynamic MAC address learning (w/DHCP)
Configurable watermarks per-CoS, per-port
VLAN translation
IEEE 802.1Qbb priority-based flow control
Energy Efficient Ethernet (IEEE 802.3az)
Provider bridging for up to 2 VLAN tags (VLAN Q-in-Q, IEEE 802.1ad)
RSTP and MSTP support (IEEE 802.1w, IEEE 802.1s)
View 13Gbps Gigabit Ethernet Switch IP Core full description to...
see the entire 13Gbps Gigabit Ethernet Switch IP Core datasheet
get in contact with 13Gbps Gigabit Ethernet Switch IP Core Supplier
No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used without the express written permission of Design And Reuse.
Give us your feedback
Was this page helpful? Ask us a question or get help