Production Proven, Complex Semiconductor IP Cores

Semiconductor IP Cores

T2M › USB › USB 3.0/ PCIe 2.0/ SATA 3.0 Combo PHY IP in 16FFC

USB 3.0/ PCIe 2.0/ SATA 3.0 Combo PHY IP in 16FFC

Description and Features

The combo PHY consist of Peripheral Component Interconnect Express (PCIe) compliant with PCIe 2.0 Base Specification with support of PIPE interface spec, Universal Serial Bus (USB) compliant with the USB 3.0, USB 2.0 (USB High-speed and Full speed) and Serial ATA (SATA) compliant with SATA 3.0 Specification. Lower power consumption is achieved due to support of additional PLL control, reference clock control, and embedded power gating control. Also, since aforementioned low power mode setting is configurable, the PHY is widely applicable for various scenarios under different consideration of power consumption.

 

Features

  • Compatible with PCIe/USB3/SATA base Specification

  • Fully compatible with PIPE3.1 interface specification

  • Data rate configurable to 1.5G/2.5G/3G/5G/6G for different application

  • Support 16-bit or 32-bit parallel interface when encode/decode enabled

  • Support 20-bit parallel interface when encode/decode bypassed

  • Support flexible reference clock frequency

  • Support 100MHz differential reference clock input or output (optional with SSC) in PCIe Mode

  • Support Spread-Spectrum clock (SSC) generation and receiving from 5000ppm to 0ppm

  • Support programmable transmit amplitude and De-emphasis

  • Support TX detect RX function in PCIE and USB3.0 Mode

  • Support Beacon signal generation and detection in PCIE Mode

  • Support Low Frequency Periodic Signaling (LFPS) generation and detection in USB3.0 Mode

  • Support COMWAKE, COMINIT and COMRESET (OOB) generation and detection in SATA Mode

  • Support L1 sub-state power management

  • Support RX low latency mode in SATA operation mode

  • Support Loopback BERT and Multiple Pattern BIST Mode

  • HPC Plus 0.9V/1.8V 1P8M

  • ESD: HBM/MM/CDM/Latch Up 2000V/200V/500V/100mA

  • Silicon Proven in TSMC 16FFC.

Deliverables

  • Circuit Layout Data with Layer Mapping Information .

  • LEF Files Presenting Placement and Routing Views

  • Library of Timing and Power Models in .lib Format

  • Verilog HDL Representation of Circuit Behavior

  • Circuit Netlist Annotated with SDF Timing Data

  • Design Guidelines and Best Practices for Layout Implementation

  • Reports Confirming Layout Consistency and Compliance with Design Rules

Application

  • PC

  • Television

  • Data Storage

  • Multimedia Devices

  • Recorders

  • Mobile Devices

Request Datasheet