High Performance Ti375
The Ti375 FPGA features the high-density, low-power Efinix® Quantum® compute fabric wrapped with an I/O interface. This FPGA has a variety of features, such as a hardened RISC-V block, SerDes transceiver, LPDDR4 DRAM controller, and MIPI D-PHY.
Together, these features enable a wide variety of applications such as PCIe cards, RF repeaters and radio units, small cell/massive MIMO, cable modems, machine vision, automotive, AV equipment and broadcast, medical imaging, and video bridges.
Quad-Core Hardened RISC-V Block
The quad-core hardened RISC-V block has a 32-bit CPU featuring the ISA RISCV32I with M, A, C, F, and D extensions, and six pipeline stages. You utilize the hardened RISC-V block by instantiating the Sapphire High-Performance SoC, combining the speed and efficiency of a hardened RISC-V block with the flexibility of peripherals in soft logic.
RISC-V CPU Block Diagram
SerDes Transceivers
The full-duplex SerDes transceiver supports multiple protocols including PCIe® 4.0, Ethernet SGMII, and Ethernet 10GBase-KR protocols as well as a PMA Direct mode with data rates from 1.25 Gbps to 16 Gbps.
Configurable High-Speed I/O
The Ti375 high-speed I/O (HSIO) pins support numerous single-ended and differential I/O standards. You can use them as regular GPIO or LVDS pairs. And, you can use them as MIPI RX or TX lanes running at speeds up to 1.5 Gbps. These HSIO pins are fully user configurable, so you can mix and match them to fit your system needs.
Use the HSIO pins with the MIPI-CSI-2 protocol to gather data from cameras or sensors and then send it to an application processor. Or, use the DSI protocol to send imaging to a display. The Efinity® software includes a suite of D-PHY, CSI-2, and DSI IP to help you create MIPI-based systems more easily.
Applications
Industrial Automation | Automotive | Cable Modems | Machine Vision | Video Bridges
