Design & Reuse
5161 IP
51
1.0
0.80-0.96 GHz 2Watts, 900MHz band Power Amplifier
...
52
1.0
4.9 to 5.9GHz Power Amplifier
...
53
1.0
10-20GHz Differential Amplifier
The GRDA1 is 10 GHz to 20 GHz differential amplifier designed on 2 um InGaP HBT process. The gain of GRDA1 is 5 dB typically with flatness of ±3dB ove...
54
1.0
2000 to 2800 MHz Phase Locked Loop
...
55
1.0
900MHz, 2140MHz & 2700 MHz, 1 watt wide band Power Amplifier
...
56
1.0
900MHz, 2140MHz & 2700 MHz, 2 watt wide band Power Amplifier
The RPW12A is 2 watt high linearity single-stage wide band Power Amplifier for the frequency range of 900MHz, 2140MHz & 2700 MHz implemented on InGaP ...
57
1.0
10GHz-15GHz Broadband Voltage Controlled Oscillator
GRV02 is broadband VCO designed on 2 um InGaP HBT Technology. The GRV02 is 10 to 15 GHz; broadband VCO designed on 2 um GaAs HBT Technology. The res...
58
1.0
10GHz-20GHz Frequency Multiplier
The GRFM1 is 10 GHz to 20 GHz Frequency multiplier designed on 2 um InGaP HBT process. GRFM1 multiplies the input frequency from 10 GHz to 20 GHz by t...
59
1.0
915MHz - 930MHz RPA12C Single stage low power low current PA
...
60
1.0
15GHz-20GHz Voltage Controlled Oscillator
The GEV03 is 15 to 20 GHz broadband VCO designed on 2 um GaAs HBT process. The device is designed for high frequency applications. The resonator part ...
61
1.0
GaAs p-HEMT Monolithic integrated transceiver Front End Module suitable for 802.11b/g (2.4GHz) application
RFISFRT01 is a monolithic integrated transceiver Front End Module suitable for 802.11b/g (2.4GHz) application. The IC contains all of the required com...
62
1.0
Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
RFDBL03C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...
63
1.0
Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
RFDBL04C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...
64
1.0
RF SP3T Switch used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW02C RF SP3T Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
65
1.0
RF SPDT Switch from 10-30 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW01C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
66
1.0
RF SPDT Switch from 2-44 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW03C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
67
1.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW05C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
68
1.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW04C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
69
1.0
2GHz-6GHz High Efficiency Broadband Low Noise Amplifier
The RS03 is 2 to 6 GHz; high efficiency Broadband Single Stage Low noise amplifier, designed on 0.35-ìm SiGe BiCMOS technology. The device is designed...
70
1.0
2GHz-6GHz Low noise amplifier
...
71
1.0
2GHz-6GHz Voltage Controlled Oscillator
RJVC02 is 2.0 - 6.0 GHz, voltage controlled oscillator. It can operate at 1.8 V supply and consumes only 1.0 mA current. The tuning bandwidth of the o...
72
1.0
SiGe BiCMOS WCDMA Power Amplifier
The RJP01 is 1.920 to 1.980 GHz high efficiency WCDMA Power Amplifier. The Amplifier is designed using 0.18 um SiGe BiCMOS technology. Power amplifier...
73
1.0
SiGe BiCMOS WLAN Power Amplifier
The RJP05 is 2.4 GHz to 2.5 GHz; high efficiency Power stage for WLAN Power Amplifier. The Amplifier is designed using 0.18um SiGe BiCMOS process for ...
74
1.0
Single stage low noise amplifier from 2-6 GHz with flat gain, low Noise Figure, high isolation, stability.
RFLN04C is a single stage low noise amplifier with flat gain, low Noise Figure, high isolation, stability. The LNA is designed to operate from 2-6 GHz...
75
1.0
CMOS Low Power Programmable Frequency Divider(50-2400 MHz)
...
76
1.0
CMOS Low Power Programmable Frequency Divider(50-2400 MHz) IP Fabricated
...
77
1.0
DNC IR SSB Mixer used in transceiver applications
RFDN03C (DNC Mixer) is IR SSB Mixer used in transceiver application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two ...
78
1.0
InGaP HBT low power buffer amplifier
The GEDA02 is 20 GHz to 40 GHz low power buffer amplifier. The amplifier is designed using 2 ìm InGaP HBT process for high frequency applications. ...
79
1.0
Poly Phase CMOS Programmable Frequency Divider (50-2400 MHz)
...
80
1.0
Low Dropout Voltage regulator
...
81
1.0
Low noise amplifier for 28-40 Ghz frequencies for 5G, satcom and other applications
RFLN05C is a four stage low noise amplifier. It provide high gain over wide bandwidth,low Noise Figure, high isolation, stability. The LNA is designed...
82
1.0
Low noise amplifier with lange couplers for 20-40 GHz frequencies for 5G , satcom and other applications
RFLN03C is a three stage low noise amplifier with Lange Coupler at input & output side for perfect input and output matching to 50 ohms. It provides h...
83
1.0
Low noise amplifier with lange couplers for 24-42 GHz frequencies for 5G , satcom and other applications
RFLN06C is a four stage low noise amplifier. It provides high gain over wide bandwidth, low noise figure, high isolation, stability. The LNA is design...
84
1.0
LOW POWER VOLTAGE REF
...
85
1.0
Downconverter IR SSB Mixer used in receives
RFDN02C (DNC Mixer) is IR SSB Mixer used in receive application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two resi...
86
1.0
Up convert LO reject Mixer used in RF transceiver applications
RFUD01C (UPC Mixer) is LO reject Mixer used in RF transceiver applications. The process used to design UPC Mixer is 0.1um GaAs pHEMT. This is singly b...
87
1.0
Driver Amplifier 8-16GHz
...
88
1.0
Driver Amplifier operating from 1-16 GHz and can be used in wide band application or to drive the high-power amplifier
RFDA07C Driver Amplifier operates from 1 - 16 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provide...
89
1.0
Driver Amplifier operating from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier
RFDA02C Driver Amplifier operates from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provid...
90
1.0
Driver Amplifier operating from 24-30 GHz and can be used in wide band application or to drive the high-power amplifier
RFDA06C Driver Amplifier operates from 24 – 30 GHz and can be used in Ka band application or to drive the high-power amplifier. The amplifier provides...
91
1.0
Driver Amplifier operating from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier
RFDA13C Driver Amplifier operates from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier. The amplifier provide...
92
1.0
Driver Amplifier operating from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier
RFDA12C Driver Amplifier operates from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier. The amplifier pro...
93
1.0
Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier.
RFDA11C Driver Amplifier operates from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. The amplifier provide...
94
1.0
Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications.
RFFEM02C Front End Module operates from 2 – 7 GHz and can be used in S / C for Wi-Fi 6 & SATCOM applications. The input and output are matched to 50 o...
95
1.0
Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications
RFFEM01C Front End Module operates from 24 – 30 GHz and can be used in low power Ka band application. The input and output are matched to 50 ohms with...
96
1.0
Buffer Amplifier operating from 10-45 GHz and can be used in wide band application or to drive the high power amplifier
RFBA02C Buffer Amplifier operates from 10-45 GHz and can be used in wide band application or to drive the high power amplifier. The amplifier provides...
97
1.0
Buffer Amplifier operating from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier.
RFBA01C Buffer Amplifier operates from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. The amplifier prov...
98
1.0
1Watts, 2.1-2.8GHz Power Amplifier
...
99
1.0
Switch with 0/20dB Attenuator
...
100
0.0
800G Channelized Ethernet MACsec IP
The Rianta Solutions MACsec IP cores are best-in-class, fully-featured 1G to 800G channelized MACsec streaming processor cores supporting both LAN and...