Design & Reuse
Catalog of SIP Cores
System on Chip design resources
123 IP
1
0.0
LDO Capless Fast Response Series ( Vin = 3.0-3.6V; Vo = 1.05-1.15V; Io = 10mA ) - Toshiba 40nm
The SGC75 are low-dropout (LDO), high current,fast response, low quiescent linear regulator IP solution for integration on SoC. It offers high power ...
2
0.0
LDO External NPN Device Series ( Vin = 1.6-3.6V; Vo = 1.05-1.15V; Io = 1A ) - Toshiba 40nm
The SGC79100 is a low-dropout, high current, fast response, low quiescent linear regulator IP solution with external NPN (or NMOS) power device for in...
3
0.0
Advanced Power Controller w/ POR & BOR for PMU DC-DC and LDO ( Vin = 2.3-3.6V ) - Toshiba 40nm
The SGC21412 is an Advanced Power Controller for integration in SoC. SGC APC is based on a configurable core that is configured for each specific SoC,...
4
10.0
Library of mathematical and floating point (FP) components
Optimized for efficient hardware implementation, the Synopsys Foundation Cores include a library of mathematical and floating point (FP) components th...
5
2.0
RF I/O Pad Set and Discrete RF ESD Protection Components
The RF libraries include analog signal pads and ESD protection components for RF applications. These libraries are offered as a supplement to the stan...
6
2.0
RF I/O Pad Set and Discrete RF ESD Protection Components
The RF library include analog signal pads and ESD protection components for RF applications. This library is offered as a supplement to the IO librar...
7
0.0
Performance modeling using stochastic components
Evaluate The System Architecture And Generate Latency/Throughput Graphs. In stochastic modeling, different channels need to be modeled for each input-...
8
0.0
DolphinWare Arithmetic Components Ips
Dolphin Technology provides DolphinWare Arithmetic Components IPs, consist of Math Operators and Converters....
9
0.0
DolphinWare Logic Components Ips
Dolphin Technology provides DolphinWare Logic Components IPs, consist of Counters, Registers and MUXs....
10
200.0
Electronic Design Automation Engineering
Discover the next generation of electronic design automation software Model, Simulate, and Optimize with EDA Software Shorten design cycles to a...
11
8.0
2.5D GPU / 2D & 3D Vector Graphics (OpenVG) Accelerator - D/AVE HD
D/AVE HD is a cost-efficient, highly configurable IP core for 2D and 3D graphics applications. The variants of the core are available for FPGAs, ASICs...
12
8.0
3D GPU / OpenGL ES 2.0 vector graphics IP core - D/AVE NX
D/AVE NX is the latest and most powerful addition to the D/AVE family of rendering cores – but still designed for resource constrained systems! It is ...
13
8.0
2D GPU / Vector Graphics Accelerator - D/AVE 2D
The D/AVE 2D is a compact, flexible and efficient 2D Vector Engine providing HW acceleration to CPU based graphics applications. D/AVE offers high qu...
14
8.0
Customizable Display Controller with composition support
CDC is a fully Customizable Display Controller IP supporting up to 16k (4096x4096 pixel) resolutions on a MIPI-DPI compliant parallel video output. Se...
15
8.0
Customizable Video Input Controller with color space conversion
CVI is a fully Customizable Video Input controller IP core. The video input controller can be applied to e.g. FPGA systems with a resource optimized, ...
16
6.0
A configurable CPU for flexible software-defined functions
TES µEngine concept enables complex digital circuit tasks to be created as software-defined functions executed by mini-computers. Each task is assigne...
17
6.0
Warping Engine IP block for image transformation, HUDs and fish-eye correction
TES Warping Engine is a specialized IP core for arbitrary high-performance re-mapping of bitmaps from memory-to-memory or memory-to-stream. Applicatio...
18
6.0
DPI video output to system memory capture IP block
The Virtual Display IP is designed to enable automated testing of the output of display controllers with DPI-2 output interface such as the TES CDC (C...
19
4.0
CAN Flexible Data-Rate Controller
The Controller Area Network (CAN) is a highly reliable serial bus protocol defined in the Bosch CAN specifications for standard CAN 2.0B and CAN FD, a...
20
4.0
Fast Fourier Transformation
Fast Fourier Transformation (FFT) calculation IP block....
21
4.0
ECDSA IP
The ECDSA IP is specifically designed for elliptic curve cryptography (ECC) using the ANSI X9.63 secp256k1 Koblitz curve. This cutting-edge ECDSA I...
22
4.0
TES Electronic Solutions - Electronics design services
TES is a leading electronics design services company and technology / IP provider. With specialized design centers located in Germany, UK, India and S...
23
4.0
Licensable baseband controller core + Licensable upper and lower protocol stacks
...
24
4.0
PKCS IP
The PKCS IP is specifically designed for RSA Laboratories' Public-Key Cryptography Standards (PKCS) series, specifically PKCS #5 v2.0. Also used for E...
25
4.0
TS-4x8 V-Band Array Antenna 4x8 Array Antenna, 57 – 67 GHz V-Connector 1.85 mm
The TS-4x8 V-Band Array Antenna is a 57 to 67 GHz planar antenna with a bore-sight gain of min. 14 dBi (18 dBi without feed losses) measured at V-conn...
26
3.0
8 Channel Stand-alone CAN controller
The TEECAN8 is an IC targeted to industry applications using CAN....
27
3.0
60 GHz Power Amplifier
The 60 GHz PA is a power amplifier designed for applications in the 57 – 64 GHz frequency range. This product is well suited for wireless LAN and poi...
28
3.0
10-bit SAR ADC
The TS_ADC_10b_X8 is a 10-bit capacitive successive approximation register (SAR) Analog-to-Digital converter (ADC) with a sampling rate of 125 kS/s. T...
29
3.0
60GHz Low Noise Amplifier
The 60 GHz LNA is a low noise amplifier designed for applications in the 57 – 64 GHz frequency range. This product is well suited for wireless LAN an...
30
3.0
12 Bit Low Power AD Converter
The IP is a 12bit fully differential successive approximation analog-to-digital converter. With a clock frequency of 5MHz a sampling rate of 200kS/s i...
31
3.0
14 Bit Sigma Delta AD Converter
Full-Scale Differential input from -320mV to +320mV Independent Conversion Output Rate 17.6kHz Active and Standby Quiescent current modes Programmable...
32
3.0
16 Bit Sigma Delta AD Converter
This macro-cell is a single-channel 16-bit oversampling ADC intended for digital audio bandwidth applications. Supplied with 1.2V, the analog and the ...
33
3.0
CAN Controller
The final ASIC (Phase 2) will be a compound system solution comprising of a power supply blocks 3.3V, 5V Regulator and the CAN ISO11898-5 physical la...
34
3.0
CAN Transceiver
The HSCAN IP is a high speed CAN Transceiver for automotive 12V applications. It is fully compliant to the ISO 11898-5 Specifications. Sleep mode and ...
35
3.0
Advanced Encryption Standard (AES) core
The AES / Rijndael core can handle input block sizes of 128, 192 or 256 bit. The Decoder needs the key and the cipher text as input. The start_de sign...
36
3.0
3V3 CAN Transceiver
The TS_CAN_3V3_X8 is a 3.3V CAN transceiver which supports data rates up to 1Mbps and is compatible with ISO 11898-2 compliant CAN transceivers. It su...
37
2.0
N-channel Multiplexed FIR Filter
Multi-channel FIR filter permits any number of inputs to be multiplexed into the same filter architecture. Much cheaper than using multiple FIR filter...
38
2.0
4-Quadrant Arctan Function
Function φ = atan2(y,x) calculates the 4-quadrant inverse tangent in the range -Pi to Pi. Functionally equivalent to the atan2 function in 'C' an...
39
2.0
30V 0.5A Hysteretic Buck LED Driver
TS_LEDDRV_30V0A5_X8 is a non-synchronous hysteretic Buck LED driver which operates with an input voltage range of 20 VDC to 30 VDC. It supports hybrid...
40
2.0
I2C Master Serial Interface Controller
Master serial interface compatible with the popular Philips® I2C standard. Features a simple command interface and permits multiple I2C slaves to be c...
41
2.0
I2C Slave Serial Interface Controller
Slave serial interface compatible with the popular Philips® I2C standard. Permits an I2C Master to communicate with your FPGA, CPLD or ASIC device. ...
42
2.0
13ns High-Speed Comparator
The TS_CMP_13ns_X8 is a high-speed comparator with no hysteresis and a propagation delay of 13ns while having a differential input signal of 25mV. The...
43
2.0
19ns Voltage-Latched Comparator
The TS_CMP_19ns_X8 is a high-speed voltage clocked comparator with rail-to-rail outputs and no hysteresis. The typical propagation delay is 19ns while...
44
2.0
Half-band Nyquist Decimation Filter
Fully configurable Nyquist decimation filter (down-sampler) with decimation factors from 2 to 2^N. The FIR filter is highly optimized for both spee...
45
2.0
Camera Link Interface
The Camera Link® IP Core is a high-speed LVDS transmitter / receiver pair that conforms to the standard Camera Link protocol originally developed by N...
46
2.0
Parallel FLASH Memory Controller
JEDEC® compliant FLASH memory controller ideal for interfacing to a wide range of parallel FLASH memory components such as the popular SST39 series fr...
47
2.0
UART to I2C Bridge Controller
Allows simple connectivity between a UART 2-wire port (Tx/Rx) and an I2C compatible bus. Allows simple programming and debug of an I2C device using a ...
48
2.0
Bayer to RGB Converter
Bayer-to-RGB converter interpolates the bayer pattern from a digital image sensor. Generates an output image at full 24-bit RGB resolution. Features ...
49
2.0
8b/10b Encoder/Decoder
Encoder/Decoder pair that implements the standard IBM® 8b/10b line code for a DC-balanced serial data stream. The 8b/10b code is a common encoding sc...
50
2.0
3D GPU / OpenGL ES 1.1 GPU - D/AVE 3D
D/AVE 3D is cost-efficient IP core for 3D graphics applications. This core is available for FPGAs, ASICs and SOCs, specifically designed for the embed...