English
You are here:
HDMI Ver.2.1 Receiver in TSMC 28nm HPC+
The SLIFHDMIT21TM28 provides a complete single-link HDMI transmitter function complies with HDMI specification version 2.1. The SLIFHDMIT21TM28 consists of two modules, a physical layer (SLIPHDT) and a link module (SLISHDMI15T). The PHY is upper compatible with DVI transmitter, and implemented as a hard IP based on an TSMC 28nm HPC+ process, while the link module is implemented as a synthesizable soft IP. Built-in High-bandwidth Digital Content Protection (HDCP) cipher function protects the transmission of audiovisual contents.
Features
- HDMI version 2.1 compliant transmitter
- Supports CTA-861G/VESA DMT
- Supports Dynamic HDR, FRL, VRR and Fast Vactive
- Wide range channel speed up to 12Gbps
- HDCP revision 1.4/2.2 compliant content protection
- Programmable PLL characteristics, transmitter swing voltage, and pre-emphasis
- Small ISI jitter by full differential data path
- TSMC 28nm HPC+ process
- IP. Built-in High-bandwidth Digital Content
- Protection (HDCP) cipher function protects the
- transmission of audiovisual contents.
- 0.9V/1.8V power supply
Benefits
- Fully compatible with HDMI version 2.1 transmitter
- HDMI1.4b/HDMI2.0b/HDMI2.1 Compliant (Support FRL(Fixed Rate Link)/ EM(Extended Metadata)packet), 3Lane(3Gbps/6Gbps)/4Lane(6Gbps/8Gbps)
- HDCP1.4/HDCP2.2
- CTA-861G(Max 8K30Hz Size)/VESA DMT
- Band width ： 250Mbps～12Gbps/ch
- VRR(Variable Refresh Rate)
- Fast Vactive,
- Dynamic HDR
- Color Space ： ITU-R BT.601/709/2020 Non Const/RGB Full/ RGB Limit/xvYCC Convert
Block Diagram of the HDMI Ver.2.1 Receiver in TSMC 28nm HPC+
View HDMI Ver.2.1 Receiver in TSMC 28nm HPC+ full description to...
- see the entire HDMI Ver.2.1 Receiver in TSMC 28nm HPC+ datasheet
- get in contact with HDMI Ver.2.1 Receiver in TSMC 28nm HPC+ Supplier
