English
You are here:
MIPI C-PHY CSI-2 TX+ for TSMC 40ULP
The MXL-CPHY-CSI2-TX+ is a high-frequency low-power, low-cost, source-synchronous, physical Layer. The PHY is configured as a MIPI Master supporting camera interface CSI-2. The High-Speed signals have a low voltage swing, while Low-Power signals have large swing. High-Speed functions are used for High-Speed data traffic while low power functions are mostly used for control.
Features
- Supports MIPI Specification for C-PHY Version 1.1
- 80 Msps to 2.5 Gsps data rate in high speed mode
- Consists of One Lane
- 10 Mbps data rate in low-power mode
- Low power dissipation
- Testability support
Benefits
- Comprehensive embedded DFT features for allowing cost-effective high-volume manufacturing tests
- Supports full-speed internal loopback testability with minimal area overhead for high-volume manufacturing tests
Deliverables
- Data Sheet
- GDSII
- LVS Netlist
- Integration Guidelines
- Synopsys timing Model
- Behavioral Model
- LEF File for P&R
Applications
- Mobile
- IoT
- Display
- Camera
- Virtual Reality
- Augmented Reality
Block Diagram of the MIPI C-PHY CSI-2 TX+ for TSMC 40ULP
View MIPI C-PHY CSI-2 TX+ for TSMC 40ULP full description to...
- see the entire MIPI C-PHY CSI-2 TX+ for TSMC 40ULP datasheet
- get in contact with MIPI C-PHY CSI-2 TX+ for TSMC 40ULP Supplier
MIPI transmitter IP
- MIPI D-PHY Transmitter in TSMC 28nm LP
- MIPI D-PHY/LVDS Combo Transmitter for Automotive
- MIPI CSI-2 Tansmitter v 2.1, Compatible with MIPI C-PHY v1.2 & DPHY v2.1.
- MIPI D-PHY CSI Transmitter in TSMC 28nm HPC+
- MIPI D-PHY Universal Lane 16FFC IP for Automotive
- 1 to 4 Lane Serial Video Transmitter For MIPI CSI2