English
You are here:
Unipolar current limiter for 2 to 26 mA in 2 mA steps. Works from 5v to 250 Volt AC/DC.
A temperature-compensated, unipolar current limiter with metal programmable taps for current limits from 2 to 26 mA in 2 mA steps. Works from 5v to 250 Volt AC/DC with 50/60 Hz rejection and bandwidth of 250 kHz.
Useful as a serial LED driver, MEMs driver, current reference, level shifting...
Proven in Silicon, samples available for evaluation
Useful as a serial LED driver, MEMs driver, current reference, level shifting...
Proven in Silicon, samples available for evaluation
Features
- Metal Programmable taps for a range of current settings. 250 Volt capability depending on process selected.
Benefits
- SimpleChips can port this design to your process.
Deliverables
- Synopsys(.lib) / Footprint (LEF) / Layout (GDSII) / Transistor netlist (CDL)/ SPICE netlist/ Datasheet (ASCII)
View Unipolar current limiter for 2 to 26 mA in 2 mA steps. Works from 5v to 250 Volt AC/DC. full description to...
- see the entire Unipolar current limiter for 2 to 26 mA in 2 mA steps. Works from 5v to 250 Volt AC/DC. datasheet
- get in contact with Unipolar current limiter for 2 to 26 mA in 2 mA steps. Works from 5v to 250 Volt AC/DC. Supplier
Current limiter IP
- Linear Li-Ion Battery Charger - Programmable charging current up to 1.1A Fast Charge in SilTerra 0.18um
- Active antenna detector with load current limit and supply current 140 uA
- Active antenna detector with load current limit
- 1.8 V, 40 MHz Crystal Oscillator with Programmable Drive & Limiter Resistor
- Antenna clipping circuit
- DC motor controller - UMC 3.5um HV