NVM OTP in UMC (180nm, 153nm, 110nm, 90nm, 80nm, 55nm, 40nm, 28nm, 22nm)
How flash-based FPGAs simplify functional safety requirements
Ted Marena, Microsemi
embedded.com (June 19, 2018)
As the quantity of industrial equipment controlled by electronics grows, so do concerns over the equipment failing and causing personal harm and property damage. Safety functions are built into equipment to prevent functional failure and ensure that if a system does fail, it fails in a nonharmful way. Examples of safety systems in industrial equipment include train breaks, sensors monitoring hazards to air quality or the physical environment, assembly line assistance robots, and distributed control in process automation equipment, just to name a few. These systems often include field programmable gate arrays (FPGAs) that, when supported by safety data packages for calculating failure rates, can play a pivotal role in streamlining safety assessments. When these devices are also flash-based and therefore immune to single event upsets (SEUs), FPGAs enable safety system developers to dramatically simplify their designs.
![]() |
E-mail This Article | ![]() |
![]() |
Printer-Friendly Page |
|
Microsemi Hot IP
Related Articles
New Articles
- Optimizing 16-Bit Unsigned Multipliers with Reversible Logic Gates for an Enhanced Performance
- How NoC architecture solves MCU design challenges
- Automating Hardware-Software Consistency in Complex SoCs
- Beyond Limits: Unleashing the 10.7 Gbps LPDDR5X Subsystem
- How to Design Secure SoCs: Essential Security Features for Digital Designers