Design & Reuse
9 IP
1
20.0
Passive/active NFC transceiver
This 13.56 MHz NFC IP in generic low-cost 0.18 μm CMOS targets compatibility with ISO/IEC 14443 Type A at 106 to...
2
2.0
NFC/RFID Controller
NT1046 is a single-chip RFID reader solution. It is composed of an integrated RF front-end, RFID framing engine supporting ISO15693, ISO14443A*, ISO1...
3
2.0
UHF RFID tag IP with 3.6kBit EEPROM and -19.5dBm sensitivity
130GF_RFID_EPCGen2_01 IP is intended for use in passive UHF transponder applications. IP derives its operating power from an RF electromagnetic field ...
4
1.0
NFC/RFID Transceiver
The NFC transceiver IC is intended for adding NFC functionality to mobile devices and other applications having embedded MCU. The device can perform i...
5
0.0
0.8 to 2.5GHz full wave rectifier with ESD protection
130GF_RECT_01 intended for use in Bluetooth Low Energy applications. IP derives power from an RF electromagnetic field, which is received and rectifie...
6
0.0
NFC (PICC, UHF, Controller) IP
T2M offers a wide range of IP including: NFC PICC Front-End IP (ISO/IEC 14443-A/B, ISO/IEC 15693, ISO/IEC 18092 Compliant): ISO/IEC 14443-A/B comp...
7
0.0
UHF RFID tag IC with 512bit EEPROM and -19dBm sensitivity
ND6005 ASIC is intended for use in passive UHF transponder applications. IC derives its operating power from an RF electromagnetic field generated by ...
8
0.0
UHF RFID tag IP with 512bit EEPROM and -19dBm sensitivity
80SMIC_RFID_EPCGen2_01 IP is intended for use in passive UHF transponder applications. IP derives its operating power from an RF electromagnetic field...
9
0.0
BLE Advertising Transmitter RF Frontend
130GF_BLE_01 is a small area transmitter with output frequency range 2.4…2.48GHz. Nominal value of output power can be either -20dBm or 0dBm. The IP d...