601 1.0

SMIC 0.18um Low Leakage MMC Card To provide a solution of the MMC cards, SMIC18LL_MMC_04B is integrated together by three independent IPs: SMIC18LL_PRG_03, SMIC18LL_ROSC_01 and SMIC18...

602 1.0

SMIC 0.18um Low Leakage Power_On Reset This is a Power-On-Reset circuit that generates a reset pulse when power supply is on. After the power AVDD18 reaches a specific level, VTR, it will o...

603 1.0

SMIC 0.18um Low Leakage Process SMIC18LL_VDD33SW_01, a 3.3V switchable power control block also called 3.3V power bypass control block, is developed by VeriSilicon and has been opti...

604 1.0

SMIC 0.18um Low Leakage Ring Oscillator The present IP is a Ring Oscillator. Its output frequency is about 55 MHz. The frequency can be fairly accurate (+/-10%) by trimming the current. Its ...

605 1.0

SMIC 0.18um Low Leakage VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operation voltage levels...

606 1.0

SMIC 0.18um Low Leakage VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operation voltage levels...

607 1.0

SMIC 0.18um LVDS Transceiver The LVDS transceiver IP is a Serializer/Deserializer (SERDES) pair that transparently translates 12–bit parallel bus into serial stream. This single s...

608 1.0

SMIC 0.18um LVDS Transceiver/Receiver This transmitter provides CMOS signal to LVDS, and the receiver provides LVDS signal to CMOS. The data rate between of them can be up to 700Mhz. The L...

609 1.0

SMIC 0.18um Mini-LVDS Transmitter The Mini-LVDS transmitter converts up to 48-bit or 36-bit RGB parallel data into 6-pair/3-pair of Mini-LVDS data stream that can support transmission ...

610 1.0

SMIC 0.18um MMC_07C To provide a solution to MMC cards, SMIC18_MMC_07C_4IN1 is consolidated by four independent IPs: SMIC18_PRG_03E_33T18V60_240mA, SMIC18_ROSC_01D_55M, S...

611 1.0

SMIC 0.18um MMC_07E To provide a solution to MMC cards, SMIC18_MMC_07E_4IN1 is consolidated by four independent IPs: SMIC18_PRG_03E_33T18V60_160mA, SMIC18_ROSC_01E_48M, S...

612 1.0

SMIC 0.18um PCI I/O Cells DUP Library VeriSilicon SMIC 0.18um 1.8V/3.3V PCI I/O Cells Library developed by VeriSilicon is optimized for Semiconductor Manufacturing International Corporatio...

613 1.0

SMIC 0.18um PCI I/O Cells Library VeriSilicon SMIC 0.18um 1.8V/3.3V PCI I/O Cells Library developed by VeriSilicon is optimized for Semiconductor Manufacturing International Corporatio...

614 1.0

SMIC 0.18um PCI-X IO The PCI-X transceiver is a IP version of PCI-X I/O pads, which is fully compatible with PCI-X R1.0 specification....

615 1.0

SMIC 0.18um PLL Analog PLL suitable for high speed clock generation. High speed VCO can run from 150MHz to 266MHz. Set different value of DM(4:0) and DN(5:0) accordin...

616 1.0

SMIC 0.18um PLL Analog PLL suitable for high speed clock generation. High speed VCO can run around 100MHz. Set different value of DM(4:0) and DN(5:0) according to the...

617 1.0

SMIC 0.18um PLL This IP is a programmable Analog PLL suitable for system clock generation. High speed VCO can run from 150MHz to 250MHz. By setting DM(5:0) and DN(7:0...

618 1.0

SMIC 0.18um PLL Analog PLL suitable for high speed clock generation. High speed VCO can run from 300MHz to 600MHz. Set different value of DM(4:0) and DN(6:0) accordin...

619 1.0

SMIC 0.18um Power-On Reset This is a Power-On-Reset circuit that generates a reset pulse when power supply is on. After the power V18 reaches a specific level, i.e., VTR, it wil...

620 1.0

SMIC 0.18um Power-On-Reset Power-On-Reset circuit uses the RC delay to generate the system reset pulses....

621 1.0

SMIC 0.18um Power-On-Reset Power-On-Reset circuit uses the RC delay to generate the system reset pulses....

622 1.0

SMIC 0.18um POWER_IP The IC Card Interface IP provides power supply for either 1.8V, 3V, or 5V Smart/SAM cards, and realizes level-shift between smart card controller and ...

623 1.0

SMIC 0.18um PWM Boost DC/DC Controller This is a boost DC/DC switching controller that adopts PWM (Pulse-Width-Modulation) control scheme. It accepts input voltage (Vin) from 0.95V to 1.8V,...

624 1.0

SMIC 0.18um Random Code Generator SMIC18_RCG_02 is to generate random code....

625 1.0

SMIC 0.18um Reduced Swing Differential Signaling Transmitter This is an embedded bus transmitter for RSDS™ (Reduced Swing Differential Signaling) interface. RSDS is an intra-panel interface bus standard develope...

626 1.0

SMIC 0.18um ROM Compiler ...

627 1.0

SMIC 0.18um Single-Port/Dual-Port SRAM, Two-Port Register File and Diffusion ROM Compiler VeriSilicon SMIC 0.18um Synchronous Memory Compiler optimized for Semiconductor Manufacturing International Corporation (SMIC) 0.18um Logic 1P6M Salic...

628 1.0

SMIC 0.18um Single-Port/Dual-Port SRAM, Two-Port Register File and Diffusion ROM Compiler for Linux VeriSilicon SMIC 0.18um Synchronous Memory Compiler optimized for Semiconductor Manufacturing International Corporation (SMIC) 0.18um Logic 1P6M Salic...

629 1.0

SMIC 0.18um Single-Port/Two-Port Register File Compiler ...

630 1.0

SMIC 0.18um SSTL2 VeriSilicon SMIC 0.18um 1.8V/3.3V SSTL2 I/O Cell Library developed by VeriSilicon is optimized for Semiconductor Manufacturing International Corporati...

631 1.0

SMIC 0.18um SSTL3 VeriSilicon SMIC 0.18um 1.8V/3.3V SSTL3 I/O Cell Library developed by VeriSilicon is optimized for Semiconductor Manufacturing International Corporati...

632 1.0

SMIC 0.18um SSTL_18 I/O SSTL_18 (Stub Series Terminated Logic for 1.8v) is an electrical interface commonly used with DDR2....

633 1.0

SMIC 0.18um Stereo Speaker Drivers The SMIC18_SPKDRIVER_01 specifies the design of stereo speaker drivers. The drivers defined in this specification use class-AB structure to reduce pow...

634 1.0

SMIC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supplies, AV18 and AV33. The normal operational voltage leve...

635 1.0

SMIC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit which detects the voltage level of its power supply, AV18. The normal operation voltage range of AV18 i...

636 1.0

SMIC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supply, AV18. The normal operation voltage range of AV18 is ...

637 1.0

SMIC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of input voltage AV33. The normal operation voltage range of AV33 is 3.0v...

638 1.0

SMIC 0.18um Voltage Detector The present IP is a Voltage Detector (VDT) circuit. Its power supply is 2.7v~3.6v....

639 1.0

SMIC 0.18um Voltage Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supply AV33. The normal operation voltage levels of AVDDL an...

640 1.0

SMIC 0.18umLL 90% shrunk Single-Port/Dual-Port SRAM, Two-Port Register File and Diffusion ROM Compiler VeriSilicon SMIC 0.16um Low Leakage Process Synchronous Memory Compiler optimized for Semiconductor Manufacturing International Corporation (SMIC) 0.1...

641 1.0

SMIC 0.18umLL Single-Port/Dual-Port SRAM, Two-Port Register File and Diffusion ROM Compiler VeriSilicon SMIC 0.18um Low Leakage Process Synchronous Memory Compiler optimized for Semiconductor Manufacturing International Corporation (SMIC) 0.1...

642 1.0

SMIC 0.18umLL Single-Port/Dual-Port SRAM, Two-Port Register File and Diffusion ROM Compiler for Linux VeriSilicon SMIC 0.18um Low Leakage Process Synchronous Memory Compiler optimized for Semiconductor Manufacturing International Corporation (SMIC) 0.1...

643 1.0

SMIC 0.18¦Ìm 1.8v/3.3v Power Switch The SMIC18_PSW_01 is a PMOS power switch between the main power supply and isolation area. It can support up to 20mA current with less than 20 mV volt...

644 1.0

SMIC 0.18¦Ìm 5v-3.3v/1.8v Power Regulator Based on SMIC 0.18¦Ìm 3.3v/1.8v Logic process, this design of Power Regulator is to provide both 3.3v and 1.8v power supplies which are regulated from...

645 1.0

SMIC 0.18μm 5V-2.8/1.8V This IP is a Low-Dropout (LDO) 5V to 2.8V and 1.8V power regulator in SMIC 0.18μm 3.3V/1.8V Logic process. When it works in regulation region, the max...

646 1.0

SMIC 0.18μm 5V-3.3V Power Regulator This IP is a Low-Dropout (LDO) 5V to 3.3V power regulator in SMIC 0.18μm 3.3V/1.8V Logic process. When it works in regulation region, the max rated ou...

647 1.0

SMIC 0.18μm 5v-3.3v Power Regulator This IP is a Low-Dropout (LDO) 5V to 3.3V power regulator in SMIC 0.18μm 3.3V/1.8V Logic process. When it works in regulation region, the max rated ou...

648 1.0

SMIC 0.18µm 5v-3.3v/1.8v Power Regulator Based on SMIC 0.18μm 3.3v/1.8v Logic process, this design of Low-Dropout (LDO) regulator is to provide both 3.3V and 1.8V supplies that are regulated ...

649 1.0

SMIC 0.18μm VCC Detector The present IP is a VCC Detector (VDT) circuit which detects the voltage level of its power supplies, AV18 and AV33. The normal operational voltage le...

650 1.0

SMIC 0.25um 2.5V APLL The present IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run up to 280MHz. By setting different values...