Design & Reuse
4793 IP
1601
1.0
GF L90LP 90nm DDR DLL - 196MHz-980MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...
1602
1.0
GF L90LP 90nm DDR DLL - 93MHz-465MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...
1603
1.0
GF L90LP 90nm Deskew PLL - 150MHz-750MHz
The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...
1604
1.0
GF L90LP 90nm Deskew PLL - 300MHz-1500MHz
The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...
1605
1.0
GF L90LP 90nm Deskew PLL - 75MHz-375MHz
The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...
1606
1.0
GF L90LP 90nm General Purpose PLL - 150MHz-750MHz
The General Purpose PLL is a wide range clock multiplier with deskew capability. It contains a 1-16 divider at the reference clock input, a 1-64 divid...
1607
1.0
GF L90LP 90nm Spread Spectrum PLL - 150MHz-750MHz
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreading capability suitable...
1608
1.0
GF L90LP 90nm Spread Spectrum PLL - 300MHz-1500MHz
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreading capability suitable...
1609
1.0
GF L90LP 90nm Spread Spectrum PLL - 75MHz-375MHz
The Spread Spectrum PLL is designed to multiply an input clock by a fixed-point number between 92 and 184 with frequency spreading capability suitable...
1610
1.0
RF SP3T Switch used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW02C RF SP3T Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
1611
1.0
RF SPDT Switch from 10-30 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW01C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
1612
1.0
RF SPDT Switch from 2-44 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW03C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
1613
1.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW05C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
1614
1.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW04C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
1615
1.0
UFS 2.1 Device Controller compatible with MIPI M-PHY 3.1 and UniPro 1.6
Arasan Chip Systems is a leading SoC IP provider of a complete suite of JEDEC UFS compliant IP solutions, which consist of IP cores, verification IP, ...
1616
1.0
UFS 2.1 Host Controller compatible with M-PHY 3.1 and UniPro 1.6
Arasan's Universal Flash Storage 2.1 (UFS 2.1) is a simple but high performance, serial interface primarily used in mobile systems, between host proce...
1617
1.0
UFS 3.0 Host Controller compatible with M-PHY 4.0 and UniPro 1.8
Arasan's Universal Flash Storage 3.0 (UFS 3.0) is a simple but high performance, serial interface primarily used in mobile systems, between host proce...
1618
1.0
UFS Host 2.1 Prototyping Kit (HDK )Total IP in a Box
Universal Flash Storage (UFS) is a simple, high performance, mass storage device with a serial line interface. UFS is designed to be the most advanced...
1619
1.0
UFS Host 3.0 Prototyping Kit (HDK )Total IP in a Box
Universal Flash Storage (UFS) is a simple, high performance, mass storage device with a serial line interface. UFS is designed to be the most advanced...
1620
1.0
2GHz-6GHz High Efficiency Broadband Low Noise Amplifier
The RS03 is 2 to 6 GHz; high efficiency Broadband Single Stage Low noise amplifier, designed on 0.35-ìm SiGe BiCMOS technology. The device is designed...
1621
1.0
2GHz-6GHz Low noise amplifier
...
1622
1.0
2GHz-6GHz Voltage Controlled Oscillator
RJVC02 is 2.0 - 6.0 GHz, voltage controlled oscillator. It can operate at 1.8 V supply and consumes only 1.0 mA current. The tuning bandwidth of the o...
1623
1.0
Gigabit Ethernet MAC with AVB
The Arasan Gigabit Ethernet Media Access Controller IP is compliant with the Ethernet IEEE 802.3-2008 standard. In addition, the Gigabit Ethernet MAC...
1624
1.0
Gigabit Ethernet MAC with IEEE 1588 PTP Support and AVB for Auto
The Gigabit Ethernet Media Access Controller with IEEE 1588 PTP IP core is compliant to the Ethernet/IEEE 802.3-2008 standard and has hardware based ...
1625
1.0
SiGe BiCMOS WCDMA Power Amplifier
The RJP01 is 1.920 to 1.980 GHz high efficiency WCDMA Power Amplifier. The Amplifier is designed using 0.18 um SiGe BiCMOS technology. Power amplifier...
1626
1.0
SiGe BiCMOS WLAN Power Amplifier
The RJP05 is 2.4 GHz to 2.5 GHz; high efficiency Power stage for WLAN Power Amplifier. The Amplifier is designed using 0.18um SiGe BiCMOS process for ...
1627
1.0
High Speed SPI AHB IP Core- Serial Peripheral Interface
The Arasan High-Speed SPI - AHB IP Core provides a high-speed data communication channel between the AHB and SPI buses. The SPI - AHB bridge enables a...
1628
1.0
High-Performance, Configurable, 8-bit Microcontroller Core
This 8051 IP core implements a range of fast, 8-bit, 8051-compatible microcontrollers that execute the MCS®51 instruction set. The R8051XC2 IP core r...
1629
1.0
Single stage low noise amplifier from 2-6 GHz with flat gain, low Noise Figure, high isolation, stability.
RFLN04C is a single stage low noise amplifier with flat gain, low Noise Figure, high isolation, stability. The LNA is designed to operate from 2-6 GHz...
1630
1.0
MIPI D-PHY Rx ONLY v1.1 @1.5ghz Ultra Low Power & Low Area for IoT & Wearables
Arasan 2nd Generation MIPI D-PHY v1.1 IP supporting speeds of up to 1.5 Gbps on TSMC 22nm process technology for SoC designs. Arasan’s D-PHY IP is a...
1631
1.0
MIPI D-PHY Rx ONLY v1.1 @1.5ghz Ultra Low Power & Low Area for IoT & Wearables
Arasan 2nd Generation MIPI D-PHY v1.1 IP supporting speeds of up to 1.5 Gbps on TSMC 22nm process technology for SoC designs. Arasan’s D-PHY IP is a...
1632
1.0
MIPI HSI Controller - (High-Speed Synchronous Serial Interface)
The High Speed Synchronous Serial Interface (HSI) Controller is used to provide high bandwidth, point-to-point, serial communication between two peers...
1633
1.0
MIPI LLI Controller - (Low Latency Interface)
The Low Latency interface (LLI) is a point-to point-interconnect that allows two devices on the separate chips to communicate as if a device attached ...
1634
1.0
MIPI RFFE Master Controller IP Core
Mobile radio communication is trending towards complex multi-radio systems comprising of several transceivers. The MIPI RFFE bus is is 2-wire serial i...
1635
1.0
MIPI RFFE Slave Controller IP Core
Mobile radio communication is trending towards complex multi-radio systems comprising of several transceivers. The MIPI RFFE bus is is 2-wire serial i...
1636
1.0
MIPI RFFE Slave Controller IP Core v3.0
Mobile radio communication is trending towards complex multi-radio systems comprising several transceivers. Arasan supports the latest MIPI RFFE stand...
1637
1.0
MIPI SLIMbus Device Controller V2.0
The Arasan SLIMbus Device Controller IP is designed to provide MIPI SLIMbus 1.01 compliant connectivity for a peripheral device, like an audio codec, ...
1638
1.0
MIPI SLIMbus Host Controller v2.0
The MIPI SLIMbus Host typically resides in a mobile platform’s application processor and provides two-wire, multi-drop connectivity with multiple audi...
1639
1.0
MIPI SoundWire Master Controller 1.1
The Total MIPI Soundwire IP Solution enables early adopters the fastest path to adoption of this new standard by offering a comprehensive IP package t...
1640
1.0
MIPI SoundWire Slave Controller 1.1
The Total MIPI Soundwire IP Solution enables early adopters the fastest path to adoption of this new standard by offering a comprehensive IP package t...
1641
1.0
MIPI UniPro Controller - v1.6
To address the explosive growth in the mobile industry, the Mobile Industry Processor Interface (MIPI) Alliance was created to define and promote open...
1642
1.0
MIPI UniPro Stack - v1.6
To address the explosive growth in the mobile industry, the Mobile Industry Processor Interface (MIPI) Alliance was created to define and promote open...
1643
1.0
BitBLT Graphics Hardware Accelerator (AHB Bus)
The Digital Blocks DB9100AHB BitBLT Graphics Hardware Accelerator Verilog IP Core renders a graphics frame by generating new bitmaps from commands to ...
1644
1.0
BitBLT Graphics Hardware Accelerator (AXI Bus)
The Digital Blocks DB9100AXI3 BitBLT Graphics Hardware Accelerator Verilog IP Core renders a graphics frame by generating new bitmaps from commands to...
1645
1.0
Ultra-Small 8051-Compatible Microcontroller
The T8051XC3 core implements one of the smallest-available 8-bit MCS®51-compatible microcontrollers. The core integrates an 8051 CPU with a serial com...
1646
1.0
UMC L130HS 130nm Clock Generator PLL - 160MHz-800MHz
The Clock Generator PLL is designed to multiply an input clock by an integer between 1 and 4096. It does not provide any deskew functionality. It cont...
1647
1.0
UMC L130HS 130nm Clock Generator PLL - 320MHz-1600MHz
The Clock Generator PLL is designed to multiply an input clock by an integer between 1 and 4096. It does not provide any deskew functionality. It cont...
1648
1.0
UMC L130HS 130nm Clock Generator PLL - 80MHz-400MHz
The Clock Generator PLL is designed to multiply an input clock by an integer between 1 and 4096. It does not provide any deskew functionality. It cont...
1649
1.0
UMC L130HS 130nm DDR DLL - 104MHz-520MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...
1650
1.0
UMC L130HS 130nm DDR DLL - 78MHz-390MHz
The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...