Design & Reuse
5757 IP
1
30.0
1.6T Ethernet UMAC
CoMira’s 1.6T Ethernet UMAC IP is designed to fulfill the MAC, PCS, and FEC requirements outlined in the IEEE 802.3-2022, IEEE 802.3ck, IEEE 802.3df, ...
2
30.0
Media Access Control Security (MACSec)
Media Access Control Security (MACSec) is an IEEE standards-based protocol for securing communication among the trusted components of an 802.1 LAN. MA...
3
30.0
Universal Chiplet Interconnect Express (UCIe) Controller
Integrating multiple chiplets within a single package has become crucial for high-performance computing. CoMira’s UCIe (Universal Chiplet Interconnect...
4
30.0
Multi-channel, multi-speed Ethernet universal media access control (MAC) and physical coding sublayer IP (UMAC)
CoMira’s multi-channel, multi-speed Ethernet universal media access control (MAC) and physical coding sublayer IP (UMAC) is fully configurable and pro...
5
20.0
FEC
As serial link speeds have increased, the reach achievable has become more and more limited by the lossy nature of the physical media which introduces...
6
10.0
VESA DSC Encoder and Decoder IP Solutions
Synopsys VESA Display Stream Compression (DSC) Encoder and Decoder IP provides a video compression solution for up to 10K ultra-high-definition displa...
7
10.0
IP Solutions for the AMBA Interconnect
The Synopsys IP solutions for the ARM® AMBA® interconnect include synthesizable IP, verification IP (VIP) and automated assembly with Synopsys’ coreAs...
8
10.0
USB 3.1/DisplayPort 1.3 Controller IP Solutions
The Synopsys SuperSpeed 3.1 USB IP solution is based on the USB 3.0 specification from the USB Implementer Forum. The comprehensive USB 3.1 IP offerin...
9
9.0
I2C Controller
I²C (Inter-Integrated Circuit) Controller is a two-wire, bi-directional serial bus that provides simple and efficient method of data transmission over...
10
9.0
I2C Slave
The I²C slave IP is fully synthesizable core and compatible with Phillips I²C standard. The IP uses I²C Bus Protocol which helps maximize the hardware...
11
9.0
USB 10Gbps Device Controller
Leveraging the benefits of USB 3.2 Gen 1 device controller, USB 3.2 Gen 2 is designed using the FPGA built-in transceiver. It is a one-stop solution f...
12
9.0
USB 2.0 Device with FIFO Interface (USB20HF)
USB 2.0 device, FIFO interface (USB20HF) IP Core provides FIFO interface for endpoints and ULPI interface for Host communication. It supports 15 IN an...
13
9.0
USB 2.0 Device, Software based enumeration RAM Interface (USB20SR)
USB 2.0 Device, Software Enumeration (USB20SR) IP Core is a RAM based USB 2.0 device core with 32-bit Avalon/AXI/AHB Lite interface and ULPI interface...
14
9.0
USB 2.0 Device, Software Enumeration FIFO Interface (USB20SF)
The USB 2.0 Device, Software Enumeration FIFO interface (USB20SF) IP Core is a FIFO based USB 2.0 device core with 32-bit Avalon/AXI/AHB Lite interfac...
15
9.0
USB 2.0 Host Controller
The USB 2.0 Host Controller (USB20HC) IP Core is a 32-bit Avalon/AXI/AHB interface compliant core and supports ULPI interface. The core supports High ...
16
9.0
USB 2.0 HUB (USB20HUB)
The USB 2.0 Hub IP core provides a link between the USB2.0 Host and multiple USB peripherals via UTMI + Low pin interface (ULPI). It supports High spe...
17
9.0
USB 2.0 On-The-Go (USB20OTG)
The USB 2.0 On-The-Go (OTG) IP Core is a 32-bit Avalon interface compliant core and supports ULPI interface. It supports both USB Host and USB Device ...
18
9.0
USB 20Gbps Device Controller
Leveraging the benefits of USB 10Gbps and 5Gbps device controller, USB 20Gbps is designed using the FPGA built-in transceiver. It is a one-stop soluti...
19
9.0
USB IP
...
20
0.0
3 -4.5 GHz Power Amplifier
...
21
0.0
5 GHz Low Noise Amplifier
...
22
0.0
3 to 10GHz Low Noise Amplifier for UWB Application
...
23
0.0
2 TO 6 GHz Driver Amplifier
...
24
0.0
2 to 6 GHz Low Noise Amplifier
Broadband Amplifier High Performance Low Current, Low Cost High Gain...
25
0.0
7-20 GHz Driver Amplifier
...
26
0.0
2-8GHz Driver Amplifier
...
27
0.0
0.1 to 1 GHZ Frequency Divider
...
28
0.0
0.4-4GHz Wideband Low Noise Amplifier
...
29
0.0
2.4GHz-2.5GHz, 25dBm Power Amplifier
...
30
0.0
0.5GHz-1.5GHz Voltage Controlled Oscillator
RJVC01 is 0.5 - 1.15 GHz, voltage controlled oscillator. It can operate at 1.2 V supply and consumes only 2.5 mA current. The tuning bandwidth of the ...
31
0.0
1.5GHz-1.7GHz Low Noise Amplifier
RJL02 is a narrow band low noise amplifier. This LNA is designed on 0.18 SiGe BiCMOS process. This device is design for GPS system application....
32
0.0
1.7 to 2.5 GHz PCS/WCDMA band Low Noise Amplifier
...
33
0.0
1.7-2.5GHz Low Noise Amplifier with High OIP3
...
34
0.0
0.7-3 GHz Low noise amplifier
The RGLNA01 is 0.7 to 3.0 GHz high efficiency GaAs Enhancement mode pHEMT Low Noise Amplifier IP Block .The device is designed for use in the IEEE 802...
35
0.0
1.7GHz-2.7GHz Two Stage Low Noise Amplifier
A high efficiency CMOS 2 stage Low Noise Amplifier designed on 0.18µm SiGe BiCMOS process. The device is designed for use in the 802.11b/g and WLAN MI...
36
0.0
0.80-0.96 GHz 2Watts, 900MHz band Power Amplifier
...
37
0.0
4.9 to 5.9GHz Power Amplifier
...
38
0.0
10-20GHz Differential Amplifier
The GRDA1 is 10 GHz to 20 GHz differential amplifier designed on 2 um InGaP HBT process. The gain of GRDA1 is 5 dB typically with flatness of ±3dB ove...
39
0.0
2000 to 2800 MHz Phase Locked Loop
...
40
0.0
800G Channelized Ethernet MACsec IP
The Rianta Solutions MACsec IP cores are best-in-class, fully-featured 1G to 800G channelized MACsec streaming processor cores supporting both LAN and...
41
0.0
900MHz, 2140MHz & 2700 MHz, 1 watt wide band Power Amplifier
...
42
0.0
900MHz, 2140MHz & 2700 MHz, 2 watt wide band Power Amplifier
The RPW12A is 2 watt high linearity single-stage wide band Power Amplifier for the frequency range of 900MHz, 2140MHz & 2700 MHz implemented on InGaP ...
43
0.0
10GHz-15GHz Broadband Voltage Controlled Oscillator
GRV02 is broadband VCO designed on 2 um InGaP HBT Technology. The GRV02 is 10 to 15 GHz; broadband VCO designed on 2 um GaAs HBT Technology. The res...
44
0.0
10GHz-20GHz Frequency Multiplier
The GRFM1 is 10 GHz to 20 GHz Frequency multiplier designed on 2 um InGaP HBT process. GRFM1 multiplies the input frequency from 10 GHz to 20 GHz by t...
45
0.0
915MHz - 930MHz RPA12C Single stage low power low current PA
...
46
0.0
15GHz-20GHz Voltage Controlled Oscillator
The GEV03 is 15 to 20 GHz broadband VCO designed on 2 um GaAs HBT process. The device is designed for high frequency applications. The resonator part ...
47
0.0
GaAs p-HEMT Monolithic integrated transceiver Front End Module suitable for 802.11b/g (2.4GHz) application
RFISFRT01 is a monolithic integrated transceiver Front End Module suitable for 802.11b/g (2.4GHz) application. The IC contains all of the required com...
48
0.0
Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
RFDBL03C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...
49
0.0
Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
RFDBL04C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...
50
0.0
RF SP3T Switch used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW02C RF SP3T Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....