Design & Reuse
Catalog of SIP Cores
System on Chip design resources
20 IP
1
15.0
Turnkey ASIC Services
Full-Cycle Turnkey ASIC Development: From RTL to Volume Production - an integratedengagement model....
2
7.5
I2C Master/Slave Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
I2C slave enables communication with an I2C master using the standard I2C protocol. It is designed for easy integration into SoC, such as sensors or m...
3
7.5
SARADC12 (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a 12-bit SAR ADC. This operates at 2 MSPS and supports 8-channels. It can measure 8 analog inputs simultaneously and converts them to digital....
4
7.5
UART/Serial Port (Exclusively for Turnkey ASIC design; not for standalone licensing)
The Serial Port IP (RS232, RS422, RS485) is a Single Port Standalone IP, which supports all the features in the modes like 16C450, 16C550, 16C550Ex, 1...
5
7.5
LCD Panel Controller IP (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is an LCD Panel Controller IP that can drives multiple LCD panels available in the market. It is configurable to support 1/3-bias, 1/2 bias LCDs....
6
7.5
SDARC24 (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a 24-bit Sigma Delta ADC IP. This can take input signals < 10 kHz and converts them to digital form....
7
7.5
IEEE1284 Parallel Port Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
The IEEE1284 compliant parallel port controller supports faster data rates up to 2.0Mbytes/sec. It supports Nibble mode, Byte Mode, EPP, and ECP. Auto...
8
7.5
Temperature Sensor IP (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a Temperature Sensor IP. It measures temperature variations within the IC and converts them in to digital form. The processor in the system ca...
9
7.5
Generic GPIO Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
General Purpose I/O pins are used for system control and connection of various devices. This (GPIO) controller provides dedicated general-purpose pins...
10
7.5
Silicon Engineering Services
MosChip Technologies is a trusted partner for Silicon Engineering Services offering Turnkey ASIC, Silicon design and IP services (integration/porting/...
11
7.5
Clock Management IP (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a Clock Management IP that can drive 3 different output clocks. These 3 different clocks are required for any simple Digital or Mixed Signal A...
12
7.5
Power Management IP (Exclusively for Turnkey ASIC design; not for standalone licensing)
This is a Power Management IP that can take 3 different input supplies and can drive 4 different output power domains. These 4 different power domains...
13
7.5
SPI Master/Slave Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
SPI Controller IP enables synchronous serial communication with slave or master peripherals. It has Generic interface which programs the control and d...
14
7.5
IrDA Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
The IRDA controller supports data rates from 2.4 Kbps to 115.2Kbps in SIR mode, 1.152 Mbps in MIR (Medium IR), and 4Mbps in FIR mode...
15
7.5
USB 2.0 Device controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
USB 2.0 Device controller implements a complete high/full speed peripheral controller that interfaces UTMI USB port transceiver on one side and to an ...
16
7.5
USB 2.0 Host controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
USB 2.0 Host Controller supports high (480 Mbps), full (12 Mbps) and low (1.5 Mbps) speed operation. Supports Control, Bulk, Isochronous and Interrupt...
17
7.5
USB 3.0 Device Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
USB3.0 Device Controller IP Core provides an integrated and customizable solution for USB3.0 Device applications. The Core is compliant with USB3.0/2....
18
7.5
USB 3.0 Host Controller (Exclusively for Turnkey ASIC design; not for standalone licensing)
USB3.0 Host Controller IP core provides an integrated and customizable solution for USB3.0 Host applications. The Core supports USB3.0/2.0 Specificati...
19
7.5
USB 3.0 Retimer (Exclusively for Turnkey ASIC design; not for standalone licensing)"
USB3.0 Retimer softcore is designed for use USB Port/Cable Retimer applications. The requirements set forth in the specification comprehend the use of...
20
0.0
Ethernet 10/100 MAC (Exclusively for Turnkey ASIC design; not for standalone licensing)
The Ethernet controller is compliant with IEEE802.3 and it provides an interface between the host subsystem and the Media Independent Interface (MII)....