EDA Consortium Reports Industry Revenue Down Slightly in Second Quarter 2008
“Solid year over year growth in the PCB/MCM and services segments were offset by declines in CAE, IC Physical Design & Verification, and Semiconductor IP, resulting in an overall decline for Q2, 2008,” said Walden C. Rhines, EDAC chair and Mentor Graphics’ CEO and chairman. “Geographically, Western Europe and Japan showed growth in Q2, but this growth was offset by declines in North America and the rest of the world.”
Companies that were tracked employed 28,004 professionals in Q2 2008, up 7 percent from the 26,164 employed in Q2 2007.
Revenue by Product Category
EDA’s largest category, Computer Aided Engineering (CAE), generated revenue of $524.7 million in Q2 2008, representing a 2.6 percent decrease over the same period in 2007. The four quarter moving average CAE growth rate was positive at 6.8 percent.
For IC Physical Design & Verification, the next largest category, revenue decreased to $317.1 million in Q2 2008, a 20.2 percent decrease compared to Q2 2007. The four quarter moving average growth rate declined 2.6 percent for IC Physical Design & Verification.
Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue increased 19.3 percent over Q2 2007 to $141.6 million. The four quarter moving average growth rate for PCB & MCM showed a 1 percent decrease.
Semiconductor Intellectual Property (SIP) revenue totaled $264.9 million in Q2 2008, a 1.6 percent decrease over Q2 2007. The four quarter moving average growth rate for SIP was slightly down at 0.8 percent.
Services revenue was $109 million in Q2 2008, up 28.5 percent from Q2 2007. The four quarter moving average growth rate for services was up 10.7 percent.
Revenue by Consuming Region
North America, EDA’s largest region, purchased $585 million of EDA products and services in Q2 2008, which represents a 13.3 percent decrease compared to Q2 2007. The four quarter moving average growth rate was down 6.9 percent for North America.
Western Europe revenue was up 10.5 percent in Q2 2008 compared to Q2 2007, with revenues of $273.4 million. The four quarter moving average growth for Western Europe was up 11.6 percent. Q2 2008 revenue from Japan increased 13.7 percent to $281.8 million compared to Q2 2007. The four quarter moving average increase was 13.1 percent for Japan.
Rest-of-World (ROW) decreased to $217.1 million in Q2 2008, a 9 percent decrease compared to the same quarter in 2007. The four quarter moving average growth was positive at 6.7 percent.
About the MSS Report
The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available by annual subscription. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design and Verification), operating system (UNIX vs. Windows) and region (North America, Western Europe, Japan, and Rest of World), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.
About the EDA Consortium
The EDA Consortium is the international association of companies that provide design tools and services that enable engineers to create the world’s electronic products used for communications, computer, space technology, medical, automotive, industrial equipment, and consumer electronics markets, among others. For more information about the EDA Consortium visit www.edac.org, or to subscribe to the Market Statistics Service call 408-287-3322 or email mss08@edac.org.
|
Related News
- EDA Consortium Reports Industry Revenue Down Slightly in First Quarter 2008
- EDA Consortium Reports Industry Revenue Down in Fourth Quarter 2008
- EDA Consortium Reports Industry Revenue Down in Third Quarter 2008
- EDA Consortium Reports Industry Revenue Down in Third Quarter 2009
- EDA Consortium Reports Industry Revenue Declined in the Second Quarter, 2009
Breaking News
- Arteris Joins Intel Foundry Accelerator Ecosystem Alliance Program to Support Advanced Semiconductor Designs
- SkyeChip Joins Intel Foundry Accelerator IP Alliance
- Siemens and Intel Foundry advance their collaboration to enable cutting-edge integrated circuits and advanced packaging solutions for 2D and 3D IC
- Cadence Expands Design IP Portfolio Optimized for Intel 18A and Intel 18A-P Technologies, Advancing AI, HPC and Mobility Applications
- Synopsys and Intel Foundry Propel Angstrom-Scale Chip Designs on Intel 18A and Intel 18A-P Technologies
Most Popular
- QuickLogic Delivers eFPGA Hard IP for Intel 18A Based Test Chip
- Siemens collaborates with TSMC to drive further innovation in semiconductor design and integration
- Aion Silicon Joins Intel Foundry Accelerator Design Services Alliance to Deliver Next-Generation Custom SoCs at Scale
- TSMC Unveils Next-Generation A14 Process at North America Technology Symposium
- BOS Semiconductors to Partner with Intel to Accelerate Automotive AI Innovation
![]() |
E-mail This Article | ![]() |
![]() |
Printer-Friendly Page |