130nm OTP Non Volatile Memory for Standard CMOS Logic Process
Digital Core Design joins Actel's CompanionCore Partners Program
BYTOM, POLAND - MARCH 23, 2009 - Digital Core Design (DCD) today announced a partnership with ACTEL Corporation that will allow the companies to better serve customers' needs for Intellectual Property (IP) implemented on ACTEL's programmable logic devices (FPGAs).
For the launch of the CampanionCore program, Digital Core Design has ported, optimized, and tested a selection of their flagship IP cores on ACTEL FPGA devices. The initial list of Cores from DCD is shown below. Check the ACTEL website for up-to-date information on DCD's CampanionCore products.Communication Cores
- D16550: Configurable UART with FIFO
- D16750: Configurable UART with FIFO
- D16950: Configurable UART with FIFO
- DLIN: LIN controller
- D68HC11E (replaces MC68HC11E microcontroller)
- D68HC11F (replaces MC68HC11F microcontroller)
- D68HC11K (replaces MC68HC11K microcontroller)
- DFPIC165X: High Performance 8-bit RISC Microcontroller
- DFPIC1655X: High Performance Configurable 8-bit RISC Microcontroller
- DRPIC1655X: High Performance Configurable 8-bit RISC Microcontroller
- DRPIC166X: High Performance Configurable 8-bit RISC Microcontroller
These Cores are available in netlist and HDL Source format for immediate purchase from Digital Core Design. DCD also offers a variety of additional packaging and licensing options to suit customer's specific needs. By leveraging partner products, customers can quickly implement a wide variety of functions in ACTEL's programmable devices.
About Digital Core Design
DCD is a private Intellectual Property (IP) Core provider and System-on-Chip (SoC) design house, an expert in IP cores architecture improvements. DCD sells its products and services directly and through its global distribution network. DCD offers VHDL and Verilog high performance and synthesizable IP cores for a speed optimized 8-, 16- and 32-bit processors, peripherals, serial interfaces, floating point arithmetic units and coprocessors. The functionality of IP solutions offered by DCD were up to date appreciated by over 200 licenses sold to over 150 customers worldwide, such as: INTEL, SIEMENS, PHILIPS, TOYOTA, MAXIM, RAYTHEON, OSRAM, GENERAL ELECTRIC, FARADAY, SAGEM, FLEXTRONICS and GOODRICH. DCD also became a member of first-class branch partner programs as: AMPP of ALTERA, AllianceCORE of XILINX, ispLeverCORE Connection of LATTICE and IP Catalyst of SYNOPSYS. For more information, please visit: www.dcd.pl.
|
Digital Core Design Hot IP
Related News
- Siemens joins Intel Foundry Services' EDA Alliance program
- Athena Joins Actel CompanionCore Program
- Arasan Chip Systems Extends USB IP Offerings to Actel's CompanionCore Program
- Intrinsix joins Real Intent's verification services partners program
- IC'Alps joins Intel Foundry Accelerator program as Value Chain Alliance (VCA) and Design Services Alliance (DSA) partner
Breaking News
- RISC-V Royalty-Driven Revenue to Exceed License Revenue by 2027
- Keysom Unveils Keysom Core Explorer V1.0
- SiFive and Kinara Partner to Offer Bare Metal Access to RISC-V Vector Processors
- PQSecure Partners with Menta SAS to Demonstrate Leakage-Resistant PQC IPs on eFPGA Fabric
- VESA Releases Compliance Test Specification Model for DisplayPort Automotive Extensions Standard
Most Popular
- Siemens to accelerate customer time to market with advanced silicon IP through new Alphawave Semi partnership
- PQSecure Partners with Menta SAS to Demonstrate Leakage-Resistant PQC IPs on eFPGA Fabric
- Imagination Announces E-Series: A New Era of On-Device AI and Graphics
- MIPI C-PHY v3.0 Adds New Encoding Option to Support Next Generation of Image Sensor Applications
- X-Silicon Revolutionizes AI and Graphics at the Edge with "Constellation" Software Platform
![]() |
E-mail This Article | ![]() |
![]() |
Printer-Friendly Page |