Scalable, On-Die Voltage Regulation for High Current Applications
Synopsys Introduces Industry's First 28-nm Multi-Gear MIPI Alliance M-PHY IP Supporting Six Standards for Mobile Applications
Scalable DesignWare MIPI M-PHY IP future-proofs mobile SoC designs while providing low power, low latency and compact footprint
BARCELONA, Spain, Feb. 29, 2012 -- MOBILE WORLD CONGRESS -- Synopsys, Inc. (Nasdaq: SNPS), a world leader in software and IP used in the design, verification and manufacture of electronic components and systems, today announced availability of a new DesignWare® MIPI M-PHY IP solution supporting multiple speed gears and a broad range of high-speed interfaces for mobile applications. Based on the industry's first silicon-proven DesignWare MIPI M-PHY IP introduced by Synopsys in 2010, the new MIPI M-PHY IP is the first 28-nanometer (nm) multi-gear solution that supports six different inter-chip interconnect protocols including the JEDEC Universal Flash Storage (UFS), the USB SuperSpeed Inter-Chip (SSIC), and the MIPI Alliance's Low Latency Interface (LLI), DigRF v4 and future CSI-3 and DSI-2 interfaces. By providing application-oriented M-PHY IP that runs at multiple speeds and is interoperable with multiple protocols, Synopsys enables design teams to "future-proof" their designs while reducing the risk and cost of integrating MIPI interfaces into basebands, application processors and mobile ICs.
The 28-nm DesignWare MIPI M-PHY IP offers Type-I and Type-II low-speed implementations to support different application requirements. With support for high-speed GEAR1, GEAR2 and GEAR3, ranging from 1.248Gbps to 5.8Gbps, this scalable solution can meet ever-increasing data rate requirements, enabling reuse of proven IP in next-generation devices. Using a variety of high-speed and low-speed burst modes and power management modes, including idle, sleep and hibernate with quick entry and exit capability, Synopsys' DesignWare MIPI M-PHY IP can be optimized to achieve required data rates while meeting the stringent power and area requirements of mobile SoCs.
"Synopsys is regarded as a technology leader in the development of MIPI IP, and we are continuing our successful collaboration to deliver the future-proof DesignWare MIPI M-PHY IP with the Tektronix M-PHY test suite," said Mike Rizzo, technology solutions manager at Tektronix. "Our M-PHY test suite includes the popular DSA70000 Series Oscilloscope and allows M-PHY users to test the M-PHY electrical functionality and integrate high-speed MIPI interfaces into mobile chipsets."
"As a longtime contributor to the MIPI working groups, Synopsys continues to help drive MIPI specifications to build a robust mobile ecosystem," said Joel Huloux, president and chairman, MIPI Alliance. "The new DesignWare MIPI M-PHY IP will likely prove useful to designers and expand their interface choices."
The DesignWare MIPI M-PHY IP is compliant with the MIPI Alliance M-PHY v1.0 specification. By working closely with the MIPI Alliance to develop its specifications, Synopsys targets its IP to comply with future MIPI M-PHY specification releases. Synopsys DesignWare MIPI M-PHY IP supports High Speed GEAR1, GEAR2 and GEAR3 rates A/B along with Type-I and Type-II low-speed capabilities. The DesignWare MIPI M-PHY's modular architecture allows implementation of a variety of transmitter and receiver lanes to meet a broad range of system requirements and all modes outlined in the protocol specification. A sophisticated clock recovery mechanism and power efficient clock circuitry are designed to maintain the integrity of the clocks and signals required to meet strict timing requirements. The DesignWare MIPI M-PHY supports large and small amplitudes, slew rate control and dithering functionality for optimized electromagnetic interference (EMI) performance.
"With an increasing number of devices integrating mobile functionality, IP solutions supporting mobile standards must be capable of meeting the power and performance targets of multiple end applications," said John Koeter, vice president of marketing for IP and systems at Synopsys. "With support for multiple speed gears and interface protocols, the 28-nanometer DesignWare MIPI M-PHY gives designers a high-quality IP solution that can reduce the risk of integrating MIPI interfaces into their SoCs today with the scalability needed to address faster data rates in the future."
Availability
The multi-gear DesignWare MIPI M-PHY IP in the 28-nm process node will be available for early adopters in calendar Q2, 2012. For more information, visit: http://www.synopsys.com/mipi.
About DesignWare IP
Synopsys is a leading provider of high-quality, silicon-proven IP solutions for SoC designs. The broad DesignWare IP portfolio includes complete interface IP solutions consisting of controllers, PHY and verification IP for widely used protocols, analog IP, embedded memories, logic libraries and configurable processor cores. To support software development and hardware/software integration of the IP, Synopsys offers drivers, transaction-level models, and prototypes for many of its IP products. Synopsys' HAPS® FPGA-Based Prototyping Solution enables validation of the IP and the SoC in the system context. Synopsys' Virtualizer™ virtual prototyping tool set allows developers to start the development of software for the IP or the entire SoC significantly earlier compared to following traditional methods. With a robust IP development methodology, extensive investment in quality, IP prototyping, software development and comprehensive technical support, Synopsys enables designers to accelerate time-to-market and reduce integration risk. For more information on DesignWare IP, visit: http://www.synopsys.com/designware.
Synopsys Demonstrates the Industry's First Silicon-Proven MIPI M-PHY
This video demonstrates the fully characterized, silicon-proven capabilities of the DesignWare MIPI M-PHY IP solution, highlighting its silicon performance as well as its electrical characteristics, which exceed target specifications.
Hezi Saar
Product Marketing Manager, DesignWare MIPI IP
About Synopsys®
Synopsys, Inc. (Nasdaq:SNPS) is a world leader in electronic design automation (EDA), supplying the global electronics market with the software, intellectual property (IP) and services used in semiconductor design, verification and manufacturing. Synopsys' comprehensive, integrated portfolio of implementation, verification, IP, manufacturing and field-programmable gate array (FPGA) solutions helps address the key challenges designers and manufacturers face today, such as power and yield management, system-to-silicon verification and time-to-results. These technology-leading solutions help give Synopsys customers a competitive edge in bringing the best products to market quickly while reducing costs and schedule risk. Synopsys is headquartered in Mountain View, California, and has approximately 70 offices located throughout North America, Europe, Japan, Asia and India. Visit Synopsys online at http://www.synopsys.com.
|
Synopsys, Inc. Hot IP
Synopsys, Inc. Hot Verification IP
Related News
- Fujitsu Semiconductor ASIC Design for 2G/3G/4G Baseband Processor in Volume Production with Synopsys 28-nm MIPI M-PHY
- Cosmic Circuits' announces silicon proven MIPI M-PHY in multiple 28nm flavors, provides complete offering for a mobile platform
- MIPI Alliance Introduces MIPI C-PHY Specification and Updates its D-PHY and M-PHY Specifications
- MIPI Alliance Introduces Enhanced UniPro and M-PHY Specifications
- Arasan Chip Systems Announces Industry First M-PHY 3.0 Total IP Solution
Breaking News
- Comprehensive ADC/DAC and AFE IP Solutions: Empowering Next-Gen Applications Across Diverse Technology Nodes
- Intel Announces Retirement of CEO Pat Gelsinger
- Tenstorrent closes $693M+ of Series D funding led by Samsung Securities and AFW Partners
- VeriSilicon partners with LVGL to enable advanced GPU acceleration for wearable devices and beyond
- HighTec C/C++ Compiler Suite Supports Andes' ISO 26262 Certified RISC-V IP for Automotive Safety and Security Applications
Most Popular
- Intel Announces Retirement of CEO Pat Gelsinger
- Tenstorrent closes $693M+ of Series D funding led by Samsung Securities and AFW Partners
- HighTec C/C++ Compiler Suite Supports Andes' ISO 26262 Certified RISC-V IP for Automotive Safety and Security Applications
- VeriSilicon partners with LVGL to enable advanced GPU acceleration for wearable devices and beyond
- Alphawave Semi Drives Innovation in Hyperscale AI Accelerators with Advanced I/O Chiplet for Rebellions Inc
E-mail This Article | Printer-Friendly Page |