PLDA and Samtec Demonstrate PCIe 4.0 Communication over Twinax Cables Allowing Full 16GT/s PCIe 4.0 Bandwidth at Minimal Manufacturing Cost
The joint demonstration combines PLDA’s PCIe 4.0 IP solutions and Samtec interconnect to deliver PCIe 4.0 speed without the use of retimers or updated motherboard using MEGTRON 6 technologies, significantly reducing cost
SAN JOSE, Calif.-- November 27, 2018 -- PLDA, the industry leader in PCI Express® controller IP solutions and Samtec, a privately held $800MM global manufacturer of a broad line of electronic interconnect solutions, today announced a demo of their combined PCIe 4.0 solution that delivers full PCIe 4.0 bandwidth (16 GT/s) over copper or optical fiber at minimal cost.
Ad |
PCIe 4.0 Controller with AMBA AXI interface PCIe 4.0 Controller supporting Endpoint, Root Port, Switch, Bridge and advanced features |
The solution is based on a PLDA PCIe 4.0 acquisition board running PLDA’s PCIe 4.0 controller IP combined with Samtec’s FireFly™ Micro Flyover System™. This demo suggests a solution to overcoming the inherent limitations of maintaining PCIe 4.0 performance over long distances without changing the motherboard technology or using costly retimers.
As cloud computing and deep learning accelerators drive faster advances in the PCIe roadmap, existing hardware designs cannot support the higher speed signals over the same distances. The PCIe 1.0 specification allowed signals to travel as much as 20 inches over traces in mainstream FR4 boards, even while passing through two connectors.
In contrast, today’s quicker 16 GT/s PCIe 4.0 signals will peter out in under six inches and without going over any connectors. In today’s designs, PCIe 4.0 signals can only travel three to five inches, requiring costly redesigns, moving to MEGTRON 6 and adding a retimer for increased distance.
The PLDA and Samtec solution demonstrates an alternate approach using optical fiber (330 feet) or Twinax Flyover™ Systems (10 inches) to deliver PCIe 4.0 x4 with no significant loss of bandwidth.
Demo Overview and benefits:
- PLDA’s demo shows a system running at 16 GT/s and displaying relevant throughput and latency measurements. The demo result shows the bandwidth is not impacted by distance when using copper or optical fibers.
- By using optical fibers, PLDA and Samtec demonstrate that PCIe 4.0 can be used for remote applications (e.g. EMI sensitive environments)
- By using passive Twinax Flyover™ Systems, PLDA and Samtec show a differentiated and affordable way to design a PCIe 4.0 platform. Using retimers, if you can find them, could cost between $15 to $25 for 16 lanes of PCIe 4.0 at 16GT/s, plus an additional $300 for updating the motherboard PCB to MEGTRON 6. (Cf Rick Merrit article: https://www.eetasia.com/news/article/18061502-pcie-45-higher-bandwidth-but-at-what-cost )
"PCIe Designers are delaying their upgrade to the next generation of PCIe because they anticipate high board manufacturing costs, said Hugues Deneux, COO of PLDA. “With this demo, we want to show a new approach that provides great bandwidth and good latency over any distance for PCIe 4.0 communications."
“Samtec and PLDA’s multi-year PCIe 4.0 collaboration lowers barriers of entry and quickens time to market,” said Arlon Martin, Senior Marketing Director of Samtec Optical Group. “The Samtec PCIe® Optical Flyover Cable Assembly enables designers to more efficiently take advantage of the incredibly low latency and high throughput without board constraints“.
Demo of PCIe 4.0 Communication over Optical Fiber and TWINAX Cables
For more information or to discover how the PLDA and Samtec approach could work for your next PCIe 4.0 design:
- Explore multiple silicon proven PLDA’s PCIe 4.0 controller solutions
- Find PCIe 4.0 platform tailored for prototyping, developing and debug of PCIe devices: https://www.plda.com/products/debug-test-solutions.
- Find more information on Samtec’s FireFly™ Micro Flyover System™ at https://www.samtec.com/firefly
- Contact PLDA to schedule a time to test your own hardware using PLDA’s demo at sales@plda.com
About PLDA
PLDA is a developer and licenser of Semiconductor Intellectual Property (SIP) specializing in high speed interconnect supporting multi-gigabit rates (2.5G, 5G, 8G, 16G, 25G, 32G, 56G, 112G) and protocols such as PCI Express, CCIX, and Gen-Z. PLDA has established itself as a leader in this field with over 3,200 customers and 6,800 licenses in 62 countries. PLDA is a global technology company with offices in Silicon Valley, France, Bulgaria, Taiwan, and China.
About Samtec, Inc.
Founded in 1976, Samtec is a privately held, $713MM global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. With 33 locations in 18 different countries, Samtec’s global presence enables its unmatched customer service. For more information, please visit http://www.samtec.com.
|
Related News
- PLDA to Demonstrate Industry's First PCIe 4.0 Switch Platform with Multiple Downstream Ports during PCI-SIG DevCon 2018
- PLDA Announces Industry's First Controller for FPGA supporting PCIe 4.0 v0.9, Allowing immediate PCIe 4.0 implementation into FPGAs
- PLDA Announces a Full Set of Solutions to Immediately Enable PCIe 4.0 Design Success
- PLDA to demonstrate a record PCIe 4.0 system throughput at PCI-SIG DevCon
- PLDA XpressSWITCH IP for PCIe technology first ever switch soft IP to pass PCI-SIG's PCIe 4.0 compliance tests
Breaking News
- TSMC September 2024 Revenue Report
- Crypto Quantique teams up with Attopsemi to simplify the implementation of PUF technology in MCUs and SoCs
- Intel, TSMC to detail 2nm processes at IEDM
- SensiML Expands Platform Support to Include the RISC-V Architecture
- MIPI Alliance Announces OEM, Expanded Ecosystem Support for MIPI A-PHY Automotive SerDes Specification
Most Popular
- Deeptech Keysom completes a €4M fundraising and deploys the first “no-code” tool dedicated to the design of tailor-made processors
- Bluetooth® V6.0 Channel Sounding RF Transceiver IP Core in 22nm & 40nm for ultra-low power distance aware Bluetooth connected devices
- Secure-IC unveils its Securyzr™ neo Core Platform at Embedded World North America 2024
- LDRA Announces Extended Support for RISC-V High Assurance Software Quality Tool Suite to Accelerate On-Target Testing of Critical Embedded Applications
- Electronic System Design Industry Posts $4.7 Billion in Revenue in Q2 2024, ESD Alliance Reports
E-mail This Article | Printer-Friendly Page |