North American Semiconductor Equipment Industry Posts January 2020 Billings
MILPITAS, Calif. — February 20, 2020 — North America-based manufacturers of semiconductor equipment posted $2.34 billion in billings worldwide in January 2020 (three-month average basis), according to the January Equipment Market Data Subscription (EMDS) Billings Report published today by SEMI . The billings figure is 5.9 percent lower than the final December 2019 level of $2.49 billion, and is 22.9 percent higher than the January 2019 billings level of $1.90 billion.
"January data marked a solid start to 2020 with strong year-over-year billings growth for North America-based semiconductor equipment manufacturers,” said Ajit Manocha, SEMI president and CEO. "We expect the equipment market to recover from the soft 2019 though growth prospects may need to be tempered with the potential industry impacts of the Coronavirus outbreak.”
The SEMI Billings report uses three-month moving averages of worldwide billings for North American-based semiconductor equipment manufacturers. Billings figures are in millions of U.S. dollars.
Billings | Year-Over-Year | |
August 2019 | $2,001.8 | -10.5% |
September 2019 | $1,959.1 | -5.7% |
October 2019 | $2,080.8 | 2.5% |
November 2019 | $2,121.0 | 9.1% |
December 2019 (final) | $2,491.7 | 17.8% |
January 2020 (prelim) | $2,344.7 | 22.9% |
Source: SEMI ( www.semi.org ), February 2020
SEMI publishes a monthly North American Billings report and issues the Worldwide Semiconductor Equipment Market Statistics (WWSEMS) report in collaboration with the Semiconductor Equipment Association of Japan (SEAJ). The WWSEMS report currently reports billings by 24 equipment segments and by seven end market regions. SEMI also has a long history of tracking semiconductor industry fab investments in detail on a company-by-company and fab-by-fab basis in its World Fab Forecast and SEMI FabView databases . These powerful tools provide access to spending forecasts, capacity ramp, technology transitions, and other information for over 1,000 fabs worldwide. For an overview of available SEMI market data, please visit www.semi.org/en/MarketInfo .
The data contained in this release were compiled by David Powell, Inc., an independent financial services firm, without audit, from data submitted directly by the participants. SEMI and David Powell, Inc. assume no responsibility for the accuracy of the underlying data.
About SEMI
SEMI® connects more than 2,100 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Strategic Association Partners, defined communities within SEMI focused on specific technologies. Visit www.semi.org to learn more
|
Related News
- North American Semiconductor Equipment Industry Posts January 2021 Billings, Topping $3 Billion for First Time
- North American Semiconductor Equipment Industry Posts December 2020 Billings
- North American Semiconductor Equipment Industry Posts November 2020 Billings
- North American Semiconductor Equipment Industry Posts October 2020 Billings
- North American Semiconductor Equipment Industry Posts September 2020 Billings
Breaking News
- Ceva multi-protocol wireless IP could simplify IoT MCU and SoC development
- Controversial former Arm China CEO founds RISC-V chip startup
- Fundamental Inventions Enable the Best PPA and Most Portable eFPGA/DSP/SDR/AI IP for Adaptable SoCs
- Cadence and TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
- Numem at the Design & Reuse IP SoC Silicon Valley 2024
Most Popular
- GUC provides 3DIC ASIC total service package to AI/HPC/Networking customers
- Qualitas Semiconductor Appoints HSRP as its Distributor for the China Markets
- Siemens collaborates with TSMC on design tool certifications for the foundry's newest processes and other enablement milestones
- Credo at TSMC 2024 North America Technology Symposium
- Huawei Mate 60 Pro processor made on SMIC 7nm N+2 process
E-mail This Article | Printer-Friendly Page |