FortifyIQ Sets the Stage at the Design Automation Conference for Revolutionizing Chip Design with Pre-silicon Security Verification
FortifyIQ, the leader in pre-silicon security verification solutions, will showcase the company’s recently announced solutions SideChannel Studio and FaultInjection Studio at the upcoming Design Automation Conference (DAC). These solutions address the two main forms of attacks that target hardware: Side-channel attacks (SCA) and fault injection attacks (FIA).
NEWTON, Mass. -- December 6, 2021 -- FortifyIQ, the leader in pre-silicon security verification solutions, will showcase the company’s recently announced solutions SideChannel Studio and FaultInjection Studio at the upcoming Design Automation Conference (DAC). These solutions address the two main forms of attacks that target hardware: Side-channel attacks (SCA) and fault injection attacks (FIA). Awareness of these attacks is growing and addressing hardware security vulnerabilities is now a major challenge for chip manufacturers. With FortifyIQ pre-silicon verification solutions, the entire security verification cycle is performed at the pre-silicon stage. This helps design teams avoid the expensive and time-consuming process of analyzing and correcting security vulnerabilities with a manufactured device, as well as potential re-spins and schedule delays.
FortifyIQ will demonstrate both SideChannel Studio and FaultInjection Studio in booth # 2436 at DAC, Monday-Wednesday, December 6-8, 2021, at Moscone West Center in San Francisco.
Additionally, at DAC on Monday, December 6th, FortifyIQ will participate in a Pavilion panel discussion titled: Trust and verify, overcoming costly and piecemeal approaches to pre-silicon side-channel attack vulnerability analysis and verification. For more information on the panel and the DAC program visit https://58dac.conference-program.com/.
To protect secrets in hardware and avoid financial losses caused by security breaches, it is essential to plan and implement defenses against both side-channel and fault injection attacks at the very early design stages, well before chip manufacturing. This is where FortifyIQ comes in. Both SideChannel Studio and FaultInjection Studio make it possible to perform security verification during the chip-design process, in the same way as functional verification helps identify and correct functional faults.
Alexander Kesler, CEO at FortifyIQ stated, “By delivering unique and innovative solutions that enable security verification in the pre-silicon stage, we enable design teams to build in security countermeasures as part of their design process. With the staggering financial losses from security breaches, pre-silicon security verification has become a necessity.”
To schedule an in-depth discussion and demonstration, visit: http://www.fortifyiq.com
About SideChannel Studio and FaultInjection Studio
SideChannel Studio and FaultInjection Studio support industry-standard design data formats and can be integrated into an existing design flow. SideChannel Studio simulates side-channel leakage and produces simulated traces in the same formats real scopes use for traces, while FaultInjection Studio performs a special-purpose fault simulation. Using the simulation output, SideChannel Studio and FaultInjection Studio then perform the same tests that certification labs perform, mount the same attacks that certification labs mount, and check whether there are any signs of leakage. Furthermore, U.S. government projects as well as many private organization projects require compliance with the NIST cryptography certification FIPS 140-3. Using SideChannel Studio in the pre-silicon stage, designers can be certain the device will pass the Test Vector Leakage Assessment (TVLA) tests necessary for the NIST certification.
About FortifyIQ
FortifyIQ’s mission is to enable maximum protection of hardware against side-channel and fault-injection attacks. FortifyIQ has developed a pre-silicon security verification toolset built to test hardware designs against Differential Power Analysis and Fault Injection attacks, as well as side-channel attack-resistant IP Cores. Founded in Newton, MA in 2019, FortifyIQ is privately funded. For more information visit https://www.fortifyiq.com/
|
FortifyIQ Hot IP
Related News
- FortifyIQ Revolutionizes Hardware Security Analysis with Pre-silicon Security Verification
- Truechip: Exhibiting and Showcasing Latest Verification IPs and NOC IPs at Design Automation Conference (DAC) 2023
- Truechip Introduces Automation Products - NoC Verification and NoC Performance - for Revolutionizing the Verification Spectrum
- Optima Launches New IC Security Verification Solution
- Aldec to Highlight ASIC Pre-Silicon Verification Spectrum with Network-On-Chip (NoC) Demonstration at DVCon Europe
Breaking News
- Alphawave Semi announced today a refocussing of the Board of Directors after reaching the three-year milestone since the Company's IPO
- Synopsys and Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU with Leading Performance on Samsung Foundry's GAA Process
- Worldwide Silicon Wafer Shipments Dip 5% in Q1 2024, SEMI Reports
- GOWIN's progress in global automotive market gathers momentum with award of ISO 26262 certification for its FPGA design environment
- PCI-SIG® Announces CopprLink™ Cable Specifications for PCIe® 5.0 and 6.0 Technology
Most Popular
- Silvaco Announces Launch of Initial Public Offering
- TSMC's A16 Process Moves Goalposts in Tech-Leadership Game
- Radiation-Tolerant PolarFire® SoC FPGAs Offer Low Power, Zero Configuration Upsets, RISC-V Architecture for Space Applications
- Synopsys Accelerates Next-Level Chip Innovation on TSMC Advanced Processes
- QuickLogic Releases Aurora 2.6 with Expanded Operating System Support and Up to 15% Faster Performance
E-mail This Article | Printer-Friendly Page |