DVB-T2 Demodulator + Decoder LDPC/ BCH IP Core Available For Immediate Implementation From Global IP Core

DVB-T2 Demodulator + Decoder LDPC/ BCH IP Core Available For Immediate Implementation From Global IP Core

March 7, 2023 - Global IP Core Sales - The new DVB-T2 demodulator is designed to be used together with an RF tuner, and an analog to digital converter. The system has an internal state machine to control the operation, and can be externally configured via the SPI interface. This design is a DVB-T2 OFDM demodulator, supplied as a portable and synthesizable Verilog-2001 IP. QAM signal constellations are supported, including QAM16, QAM64 and QAM256. QPSK, and BPSK are also supported. The operation of the demodulator is automated by a master finite state machine. The LDPC block and the BCH decoder deal with short frame and normal frame types. The LDPC decoder decodes iteratively following the minimum-sum algorithm. The BCH decoder can correct up to 12 bits, or 10 bits per code-word, depending on the frame type and coding rate. The other two BICM chains are used for signaling and parameter passing.

Related

DVB-T2 Demodulator and LDPC/ BCH Decoder

Additional features include:

• DVB-T2 EN302 755 V1.2.1, Rev.9 compliant
• Supports IF input
• Single input – Single output (SISO)
• Sampling frequency offset (SFO) tracking and compensation
• Carrier frequency offset (CFO) detection and correction
• Flexible channel BW (1.7, 5, 6, 7, 8, and 10) MHz
• Channel BW (1.7, 5, 6, 7, 8, and 10) MHz
• Soft demodulation
• FFT size (1, 2, 4, 8, 16, and 32) K
• Coding rate (1/2, 3/5, 2/3, 3/4, 4/5, and 5/6)
• Short and long frames
• Layered Min-Sum LDPC decoder
• Parallel and Serial MPEG outputs

Benefits:

The design interfaces to an external Analog to Digital converter, which receives the analog signal from the external tuner. The included carrier frequency offset (CFO) correction can compensate up to 500KHz for 8MHz channel bandwidth. The timing correction loop can correct mismatches as large as 50ppm depending on the FFT size and QAM constellation.

Please contact us for more information at info@global-ipc.com or check out our product portfolio at www.global-ipc.com

About Global IP Core Sales

Global IP Core Sales® was founded in 2021 and provides state-of-the-art IP Cores for the Semiconductor market. The majority of our products are silicon proven and can be seamlessly implemented into FPGA and ASIC technologies. Global IP Core Sales® will assist you with your IP Core and integration needs. Our mission is to grow your bottom line.

Contact Global IP Core Sales Fill out this form for contacting a Global IP Core Sales representative. Your Name: Your E-mail address: Your Company address: Your Phone Number: Write your message: