MIPI D-PHY / C-PHY Combo IP for TSMC (5nm, 6/7nm, 12/16nm, 22nm, 28nm, 40nm)
Top 10 Foundries Report Nearly 20% QoQ Revenue Decline in 1Q23, Continued Slide Expected in Q2, Says TrendForce
June 12, 2023 -- TrendForce reports that the global top 10 foundries witnessed a significant 18.6% QoQ decline in revenue during the first quarter of 2023. This decline—amounting to approximately US$27.3 billion—can be attributed to sustained weak end-market demand and the compounded effects of the off-peak season. The rankings also underwent notable changes, with GlobalFoundries surpassing UMC to secure the third position, and Tower Semiconductor surpassing PSMC and VIS to claim the seventh spot.
Declining capacity utilization rate and shipment volume contribute to widened revenue decline
The revenue decline in Q1 was primarily influenced by declining capacity utilization rates and shipment volume across the top 10 foundries. For instance, TSMC generated US$16.74 billion in revenue—marking a 16.2% QoQ drop in revenue. Weakened demand for mainstream applications such as laptops and smartphones led to a significant decline in the utilization rates and revenue of the 7/6 nm and 5/4 nm processes, falling over 20% and 17%, respectively. While the second quarter may see temporary relief coming from rush orders, the persistently low capacity utilization rate indicates that revenue is likely to continue declining, albeit at a slower pace compared to Q1.
Samsung witnessed a decline in both 8-inch and 12-inch wafer capacity utilization rates, leading to a staggering 36.1% Q1 revenue decline— the highest among industry players in the first quarter—down to US$3.45 billion. While there are sporadic orders for certain components in Q2, it is important to note that most of these orders are driven by short-term inventory replenishment rather than a strong signal of improved end-market demand. However, the introduction of new 3 nm products is expected to contribute to revenue in Q2, which will likely alleviate the rate of decline. GlobalFoundries reported Q1 revenue of US$1.84 billion, down 12.4% QoQ. Since the market turnaround in the second half of last year, Global Foundries has maintained stable operations due to strong demand from various sectors such as automotive, defense, industrial equipment, and government applications in the US. This consistent performance has allowed GlobalFoundries to surpass UMC and secure the third position in terms of revenue in Q1. Looking ahead to Q2, the company is expected to benefit from stable orders in industrial IoT, aerospace and defense, and automotive sectors, supporting capacity utilization and resulting in revenue levels similar to those in the first quarter.
UMC reported a Q1 revenue decline of 17.6%, amounting to approximately US$1.78 billion in the first quarter. This decline was particularly notable for 28/22 nm and 40 nm processes, both decreasing by at least 20%. The company’s capacity utilization rate for 8-inch wafers is projected to fall below 60% in 2Q23 due to a reduction in customer orders for PMIC and MCU. However, its 12-inch capacity utilization rate will benefit from urgent orders for 28/22 nm products such as Tcon and TV SoC—resulting in an estimated 80% utilization rate. UMC’s revenue is expected to remain steady or experience a slight increase next quarter given the stable ASP. SMIC posted US$1.46 billion in first-quarter revenue—a 9.8% QoQ revenue decline. Revenue from 8-inch wafers fell nearly 30%, while revenue from 12-inch wafers saw a slight increase of 1–2% due to a diverse product portfolio and support from domestic demand in China. SMIC is expected to benefit from the recovery of orders for particular products such as Driver IC and Nor Flash and will continue to reap the benefits of Chinese demand. Both shipment volume and capacity utilization rate are anticipated to improve, resulting in revenue growth.
Weak consumer product demand hits PSMC and VIS revenue hard
The foundry industry has been following a downward trend since the second half of 2022. Second and third-tier foundries, constrained by process technology limitations and high product overlap, face intense competition and lack bargaining power. As a result, their operating performance is more volatile in a declining market. In Q1, the most notable change from 6th place to 10th place rankings was Tower Semiconductor’s ascent to seventh place. The company, supported by demand from the European market, only experienced a relatively modest—in comparison to many other second and third-tier foundries—a quarterly drop of 11.7% (down to approximately US$360 million).
PSMC benefited from the replenishment of television-related LDDI inventory and experienced a 26% increase in revenue in its HV processes. Nevertheless, its other platform products such as PMIC and Power discrete continue to undergo inventory adjustments, and customer willingness to place orders remain cautious. The company’s Q1 revenue reached approximately $332 million, representing a quarterly decline of 18.7%. Similarly, VIS witnessed a recovery in wafer orders from both large and small-sized DDI customers as inventory levels approached healthy levels. However, PMIC wafer orders remained weak. VIS recorded a Q1 revenue of approximately US$269 million, reflecting an 11.8% quarterly decline. Other companies, including HuaHong Group, reported a Q1 revenue of around $845 million—down 4.2% compared to the previous quarter. DB Hitek’s revenue stood at US$234 million, experiencing a 20% QoQ decline.
TrendForce expects a continued decline in revenue for the top 10 foundries in Q2, although at a slower rate than in the first quarter. While supply chains are expected to gradually build inventory in response to peak season demand in the second half of the year, the accumulation of inventory and slow consumption have currently dampened customer attitudes toward stockpiling. Consequently, the overall production cycle of foundries in Q2 is expected to be more relaxed, with limited growth in capacity utilization rates. Only sporadic rush orders for products such as TV SoC, WiFi 6/6E, and TDDI are expected to drive any notable increase in utilization rates.
For more information on reports and market data from TrendForce’s Department of Semiconductor Research, please click here, or email Ms. Latte Chung from the Sales Department at lattechung@trendforce.com
For additional insights from TrendForce analysts on the latest tech industry news, trends, and forecasts, please visit our blog at https://insider.trendforce.com/
|
Related News
- Revenue Decline of Global Top 10 IC Design Houses Expanded to Nearly 10% in 4Q22, Decline Expected to Continue into 1Q23, Says TrendForce
- Total Revenue of Top 10 Foundries Fell by 4.7% QoQ for 4Q22 and Will Slide Further for 1Q23, Says TrendForce
- Top 10 Foundries Experience 7.9% QoQ Growth in 3Q23, with a Continued Upward Trend Predicted for Q4, Says TrendForce
- Top Ten Semiconductor Foundries Report a 1.1% Quarterly Revenue Decline in 2Q23, Anticipated to Rebound in 3Q23, Says TrendForce
- Global Top 10 Foundries' Total Revenue Grew by 6% QoQ for 3Q22, but Foundry Industry's Revenue Performance Will Enter Correction Period in 4Q22, Says TrendForce
Breaking News
- VeriSilicon partners with LVGL to enable advanced GPU acceleration for wearable devices and beyond
- HighTec C/C++ Compiler Suite Supports Andes' ISO 26262 Certified RISC-V IP for Automotive Safety and Security Applications
- Imagination DXS GPU IP recognised as game-changer for the car industry
- Think Silicon and LVGL Accelerate Graphics Libraries for Microcontrollers
- Silicon Creations Collaborates with Interex Semiconductor to Distribute High-Performance IPs in India
Most Popular
- Silicon Creations Collaborates with Interex Semiconductor to Distribute High-Performance IPs in India
- Think Silicon and LVGL Accelerate Graphics Libraries for Microcontrollers
- HighTec C/C++ Compiler Suite Supports Andes' ISO 26262 Certified RISC-V IP for Automotive Safety and Security Applications
- Government of India creating enabling environment for Semiconductor Design Community with direct access to National Chip Design Infrastructure
- Siemens' Solido SPICE now certified for multiple leading-edge Samsung Foundry processes
E-mail This Article | Printer-Friendly Page |