Atmel's New Single-Cycle 8051 Core Provides Big Performance Boost and Low Power

12 Times Faster than the Standard 8051 Core Power Consumption Reduced by 85%

Nantes, France, March 8, 2005 . . . Atmel® Corporation (Nasdaq: ATML), a global leader in the development and fabrication of advanced semiconductor solutions, announced today the availability of its new AT89LP family, based on a Single-Cycle 8051 Core. Twelve times faster than the standard 8051 core, this new family extends the existing range of 8051 Flash microcontrollers.

These new devices are optimized for applications that require low power consumption and at the same time high performance at low cost. A wide operating voltage range of 2.0V to 5.5V is offered to accommodate power management, white goods and battery-operated applications.

The AT89LP CPU requires only one clock cycle for every byte fetch, whereas the classic 8051 CPU requires 12 clock cycles for every byte fetch. The AT89LP core is capable of 20 MIPS throughput at 20 MHz clock frequency. In comparison, the classic 8051 architecture delivers less than 2 MIPS at 20 MHz. Conversely, at the same MIPS throughput as the classic 8051, the new AT89LP core runs at a much lower clock frequency, thereby reducing power consumption by 85%.

Binary compatibility with the standard 8051 instruction set allows designers to easily migrate from multi-clock cycle 8051 devices to the AT89LP series, and easily upgrade their application's performance without a costly and time-consuming redesign. The family of devices offers designers an opportunity to achieve higher speed, or significantly reduce power consumption while maintaining software and hardware compatibility. They can also help designers to solve EMC issues by reducing operating frequency.

"With the new products, system designers enjoy up to 85% decrease in power consumption compared to classic 8051 microcontrollers at the same MIPS performance level," said Manish Vadher, Atmel's Marketing Director. "Atmel Single-Cycle AT89LP Flash microcontrollers are easy to use, and offer a rich and powerful instruction set at a great performance."

The AT89LP family consists of devices with 2 to 64 Kbytes of in-system programmable Flash memory, and is available in a variety of pin options, from 14, 20, 28 and 44. They include on-chip DataFlash®, 10-bit ADC, analog comparator, pulse width modulators, programmable watchdog timer, enhanced UART, internal RC oscillator, functions which are ideally suited for power management, motor control and industrial control applications.

The first two devices of the family are the AT89LP2052 and AT89LP4052. Housed in 20-pin PDIP, TSSOP, SOIC packages, they feature 2 Kbytes and 4 Kbytes of Flash code memory, respectively. They are pin-compatible with the existing AT89C2051 and AT89C4051. Samples are available now with production in 2Q05. Pricing for 10,000 units is $0.85 for the AT89LP2052 and $0.99 for the AT89LP4052. In-system Programming of these devices is supported by the AT89ISP programmer, which has a retail price of $25.

Information

Further information about Atmel's AT89LP2052 and AT89LP4052 may be retrieved at:

http://www.atmel.com/dyn/products/product_card.asp?PN=AT89LP2052

http://www.atmel.com/dyn/products/product_card.asp?PN=AT89LP4052

About Atmel

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions. Focused on consumer, industrial, security, communications, computing and automotive markets, Atmel ICs can be found Everywhere You AreSM.

© Atmel Corporation 2005. All rights reserved. Atmel®, logo and combinations thereof, DataFlash® , and others, are registered trademarks, and Everywhere You AreSM and others are trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be the trademarks of others.