English
You are here:
10 to 40 MHz crystal oscillator
180GF_OSC_01 is a crystal oscillator with Pierce architecture. The block consists of a feedback amplifier, amplitude detector, reference source with POR signal and comparator for generating CMOS output signal. The POR signal allows to avoid clock glitches during power up.
The crystal oscillator has no external control and starts to operate after power-on.
Oscillator has 3 modes:
• quartz mode (a);
• bypass mode when external clock is applied to XIN (b);
• bypass mode when external clock is applied to XOUT (c).
The crystal oscillator has no external control and starts to operate after power-on.
Oscillator has 3 modes:
• quartz mode (a);
• bypass mode when external clock is applied to XIN (b);
• bypass mode when external clock is applied to XOUT (c).
View 10 to 40 MHz crystal oscillator full description to...
- see the entire 10 to 40 MHz crystal oscillator datasheet
- get in contact with 10 to 40 MHz crystal oscillator Supplier
oscillator IP
- Low frequency XTAL oscillator optimized for low power
- Low frequency XTAL oscillator optimized for low power
- Free-running on-chip oscillator
- Low frequency 32-kHz RC oscillator optimized for low power
- Low frequency XTAL oscillator optimized for low power
- Flexible 200kHz-20MHz Oscillator - Customizable frequency, Low Power in TSMC 40nm