2.5Gb Ethernet MAC
The data received from the GMII interface is first buffered until sufficient data is available to be processed by the Receive MAC (Rx MAC). The Preamble and the Start of Frame Delimiter (SFD) information are then extracted from the incoming frame to determine the start of a valid frame. The Receive MAC checks the address of the received packet and validates whether the frame can be received before transferring it into the FIFO. Only valid frames are transferred into the FIFO. The 2.5Gb MAC however always calculates CRC to check whether the frame was received error-free or not.
View 2.5Gb Ethernet MAC full description to...
- see the entire 2.5Gb Ethernet MAC datasheet
- get in contact with 2.5Gb Ethernet MAC Supplier
Block Diagram of the 2.5Gb Ethernet MAC IP Core
FPGA IP
- Complete USB Type-C Power Delivery PHY, RTL, and Software
- Ethernet Switch / Router IP Core - Efficient and Massively Customizable
- RT-630-FPGA Hardware Root of Trust Security Processor for Cloud/AI/ML SoC FIPS-140
- CXL 2.0 Agilex FPGA Acclerator Card
- Secure-IC's Securyzr(TM) AES-GCM Multi-Booster Réduire la liste des FPGA aux noms des gammes
- CXL 2.0 Dual Mode Controller