English
Multiplexing transceiver with 4 CSI2 inputs and a single CSI2 output
You are here:
3.3 - 4.2V to 0 - 200V step-up DC/DC converter - XFAB XT018
180XFAB_DCDC_03 is a DC/DC step-up voltage converter that generates +200V output voltage from 3.3V to 4.2V. The DC/DC is designed for no load at the output at 44uA current consumption. The block contains of OTA and transistor-capacitive voltage multiplier cells. Shutdown mode is activated by setting en to “0” and turns off the DC/DC converter. Current consumption decrease with output voltage increasing. It will take 20ms to charge external 1nF capacitor from 0 to 200V.
View 3.3 - 4.2V to 0 - 200V step-up DC/DC converter full description to...
- see the entire 3.3 - 4.2V to 0 - 200V step-up DC/DC converter datasheet
- get in contact with 3.3 - 4.2V to 0 - 200V step-up DC/DC converter Supplier
DCDC IP
- Nano power DC-DC converter in TSMC 22ULL with ultra-low quiescent current and high efficiency at light load
- High efficiency and Low BoM DC-DC designed in GobalFoundries 22FDX
- GF 22FDX combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
- TSMC 40nm ULP combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
- TSMC 40nm ULP eFlash combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
- Combo voltage regulator in TSMC 40nm LP eFlash combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode