90nm OTP Non Volatile Memory for Standard CMOS Logic Process
3.3V to 1.0V, 3.0A Step-down DC-DC converter
The DC-DC converter contains overload protection, and undervoltage-lockout circuit. During startup time DC-DC converter can operate both in the soft start mode, which provides the gradual increase of the output voltage and without it.
Independent power good, enable and soft start pins allow simple power sequencing approaches for driving digital loads.
The embedded Bias and LDO blocks provide a required voltage and current references to DC-DC sub-blocks.
View 3.3V to 1.0V, 3.0A Step-down DC-DC converter full description to...
- see the entire 3.3V to 1.0V, 3.0A Step-down DC-DC converter datasheet
- get in contact with 3.3V to 1.0V, 3.0A Step-down DC-DC converter Supplier
DCDC IP
- Nano power DC-DC converter in SMIC 40EF with ultra-low quiescent current and high efficiency at light load
- Nano power DC-DC converter in TSMC 22ULL with ultra-low quiescent current and high efficiency at light load
- Nano power DC-DC converter in TSMC 40uLP with ultra-low quiescent current and high efficiency at light load
- TSMC 40nm LP combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
- High efficiency and Low BoM DC-DC designed in GobalFoundries 22FDX
- GF 22FDX combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode