English
130nm OTP Non Volatile Memory for Standard CMOS Logic Process
You are here:
30GHz VCO in SiGe
The PMCC_VCO20G /24G /25G /26G /30G is a set of fully differential high speed VCOs covering 20GHz … 30GHz frequency range, designed using Jazz SiGe120 (SBC18HX) process. Differential architecture ensures substrate and power supply noise immunity. Macro features optional 50 Ohm terminated buffers at its output. Built-in power-down mode enables power saving in case when block is not operated. Operation frequencies, I/O signal levels, control functions and features can be customized upon special agreement.
View 30GHz VCO in SiGe full description to...
- see the entire 30GHz VCO in SiGe datasheet
- get in contact with 30GHz VCO in SiGe Supplier
VCO IP
- Ultra-low Phase Noise 5GHz VCO in 40nm CMOS
- Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
- Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
- BJT VCO 4.8V + 2.5V, 3.4-4.8 GHz - IHP 250nm SiGe
- VCO 12-14GHz, 64 subbands
- VCO auto-calibration for Varactor 7bit