The D68HC11F is a synthesisable SOFT Microcontroller IP Core, fully compatible with the Motorola 68HC11F1 industry standard. It can be used as a direct replacement for the 68HC11F1 Microcontrollers.
In the standard configuration, the core has integrated on-chip major peripheral functions. An asynchronous serial communications interface (SCI) and separate synchronous serial peripheral interface (SPI) are included. The main 16-bit, free-running timer system, contains input capture and output-compare lines and a real-time interrupt function. An 8-bit pulse accumulator subsystem, can count external events or measure external periods. Self-monitoring on-chip circuitry is included to protect the D68HC11F against system errors. The Computer Operating Properly (COP) watchdog system, protects against software failures. An illegal opcode detection circuit provides a non-maskable interrupt, if illegal opcode is detected. Two software-controlled power-saving modes - WAIT and STOP, are available to conserve additional power. These modes make the D68HC11F IP Core especially attractive for automotive and battery-driven applications.
The D68HC11F Microcontroller Core can be equipped with the ADC Cotroller, allowing use of external ADC Controller with standard ADC software. The ADC Controller makes external ADC's visible as internal ADC's in original 68HC11F1 Microcontrollers.
The D68HC11F has built-in,real time hardware on chip debugger - the DoCD , allowing easy software debugging and validation.
The D68HC11F is fully customizable - it is delivered in the exact configuration to meet user's requirements. There is no need to pay extra for not used features and wasted silicon. It includes fully automated testbench with complete set of tests, allowing easy package validation, at each stage of SoC design flow.
Each of the DCD's D68HC11F Core, has built-in support for DCD Hardware Debug System, called DoCD . It is a real-time hardware debugger, which provides debugging capability of a whole System on Chip (SoC).
Unlike other on-chip debuggers, the DoCD provides a non-intrusive debugging of running application. It can halt, run, step into or skip an instruction, read/write any contents of microcontroller, including all registers, SFRs, including user defined peripherals, data and program memories.
- Cycle compatible with original implementation
- Software compatible with 68HC11 industry standard
- I/O Wrapper making it pin-compatible core
- SFR registers remapped to any 4KB memory page
- Two power saving modes: STOP, WAI
- Fully synthesizable
- Static synchronous design
- No internal tri-states
- Scan test ready
- Source code:
- VHDL Source Code or/and
- VERILOG Source Code or/and
- Encrypted, or plain text EDIF netlist
- VHDL & VERILOG test bench environment
- Active-HDL automatic simulation macros
- ModelSim automatic simulation macros
- Tests with reference responses
- Technical documentation
- Installation notes
- HDL core specification
- Synthesis scripts
- Example application
- Technical support
- IP Core implementation support
- 3 months maintenance
- Delivery the IP Core updates, minor and major versions changes
- Delivery the documentation updates
- Phone & email support