English
Hardware Root of Trust IP Cores to Create, Wrap and Manage Keys
You are here:
a bridge to convert the slave SPI interface to the master UART interface and vice versa
The dti_spi_to_uart is a bridge to convert the slave SPI interface to the master UART interface and vice versa.
Features
- Programmable data length UART (8 bits)
- Programmable 1, 2 bit Stop
- Programmable Data Direction (LSB first or MSB first)
- Programmable Clock polarity and phase (CPOL and CPHA) – 4 mode
- Programmable parity mode
- Configurable oversampling support (8x, 16x)
Benefits
- Compliant with the following specifications: AMBA, Advanced Peripheral Bus (APB) Specification Version 2.0
Deliverables
- Key Features
- Encrypted Verilog/SystemVerilog RTL, or post-synthesis netlist
- Synthesis and STA scripts
- User guide documents
- SV/UVM Verification suite with BFM
Applications
- Communications, Data Processing, Industrial, Automotive
View a bridge to convert the slave SPI interface to the master UART interface and vice versa full description to...
- see the entire a bridge to convert the slave SPI interface to the master UART interface and vice versa datasheet
- get in contact with a bridge to convert the slave SPI interface to the master UART interface and vice versa Supplier
SPI IP
- AHB Quad SPI Controller with Execute in Place (70115)
- AHB Octal SPI Controller with Execute in Place (70114)
- Flash SPI controller master/slave
- Quad-SPI FLASH Controller AHB
- AXI / AHB / APB - SPI Flash Memory Controller - Octal/Quad/Dual/Single SPI I/O - CPU access to Flash and optional Execute-in-Place (XIP), Boot, DMA
- SPI Flash Memory Controller