English
You are here:
Bandgap voltage reference (output voltage 0.4 V)
The bandgap voltage reference generates temperature-compensated voltage due to mutual compensation of temperature dependence of bipolar diodes and resistors. It is a simple to configure and operate block, combining good parameters accuracy, small area and low current consumption. The block consists of bandgap, buffer and current sources. The bandgap produces on pin out voltage level around 0.4 V, which adjusted by a trimming codes. The buffer repeats the value of the reference voltage. Signals, en_vbgbuf and en_testmode, control the buffer. Each current source delivers a current of 250 nA.
The block is designed on Global Foundries CMOS 55 nm technology.
The block is designed on Global Foundries CMOS 55 nm technology.
Features
- Global Foundries CMOS 55 nm
- Output voltage reference 0.4 V
- Output currents reference 250 nA
- Low current consumption
- Small area
- Temperature-compensated voltage in a wide temperature range
- Can be ported to foundries TSMC, UMC, SMIC, iHP, AMS, Vanguard, SilTerra and other also compatible to with different technology nodes (For more information contact NTLab)
Deliverables
- Schematic or NetList
- Abstract model (.lef and .lib files)
- Layout view (optional)
- Behavioral model (Verilog)
- Extracted view (optional)
- GDSII
- DRC, LVS, antenna report
- Test bench with saved configurations (optional)
- Documentation
Applications
- Voltage regulators
- Comparison and detection systems
- System-on-chip for different purposes
- Measurement and calibration systems
- Technological research of microelectronic components
- Navigation systems
View Bandgap voltage reference (output voltage 0.4 V) full description to...
- see the entire Bandgap voltage reference (output voltage 0.4 V) datasheet
- get in contact with Bandgap voltage reference (output voltage 0.4 V) Supplier
Bandgap
- ACCUREF™ Bandgap Reference (Silicon-proven 130 nm, low-power, low-noise, ultra-precise single-digit mV accuracy, no external components required)
- Bandgap Reference for Integrated PMU (Silicon-proven 40 nm, high-accuracy of < ±1%)
- 40nm 1.8V Programmable Band-Gap Reference with 0.55V output
- ULP Bandgap Voltage Reference in Silterra 0.18um
- Bandgap reference (0.6 V output, optimized for SOC integration, 110 nm)
- Bandgap reference (0.7 V output, optimized for SOC integration, UMC 180 nm)