English
You are here:
Bluetooth 5.0 LE Transceiver
The BLE5T55ULP RF IP is designed for TSMC 55nm ULP Process. It combined 2.4 GHz RF and MODEM for Bluetooth 5.0 Low Energy (BLE 5.0) applications. Supported data rates are 1 Mbps and 2 Mbps according to the Bluetooth Low Energy standard. The SPI, data, and control register interface connected to MAC and MCU for Silicon on Chip (SOC) System.
Features
- 1. Modem with Integrated RF Radio for 2.4 GHz Bluetooth 5.0 communication link
- 2. SDK for ARM M0~M4 Platforms implementing the Link Layer and Profile Stack in software
- 3. SPI interface for TX / RX Data flow and Configuration by an external MCU or SOC
- 4. BQB Certified as a PHY component
- 5. Compliant with Bluetooth® 5 Low Energy Specification
- 6. Sleep Mode (~1.3µA) & Deep Sleep Mode (~0.8µA)
- 7. High TX power with low current (+10dBm, ~10mA)
- 8. Power Management Unit for power state switching
- 9. Immune to interference (-25dBm image rejection)
- 10. 16 / 32MHz crystal, 16MHz clock out to external MCU
- 11. Data rate: 1 Mbps and 2 Mbps
- 12. RSSI read-out
- 13. Integrated security: CRC, AES-128, AES-CCM
- 14. Embedded 32KHz clock (± 500 ppm)
Block Diagram of the Bluetooth 5.0 LE Transceiver IP Core
View Bluetooth 5.0 LE Transceiver full description to...
- see the entire Bluetooth 5.0 LE Transceiver datasheet
- get in contact with Bluetooth 5.0 LE Transceiver Supplier
bluetooth IP
- Bluetooth Dual Mode v5.2 Protocol Stack SW IP
- Bluetooth LE v5.2 IP in TSMC40LP
- RF transceiver for Bluetooth 4.0, Bluetooth 5.0, 802.15.4
- Ultra low-power 2.4 GHz transceiver for Bluetooth Low Energy 5
- RivieraWaves Bluetooth 4.2 low energy Baseband Controller, software and profiles
- RivieraWaves Bluetooth 5 low energy Baseband Controller, software and profiles