English
You are here:
Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in GF 22nm (Silicon Proven)
This Ultra-Low-Power Dual-Mode Bluetooth RF transceiver IP is designed to support 2.4 GHz standards like Bluetooth Classic (BR/EDR), Bluetooth Low Energy, 802.15.4 PHY Layer (e.g. ZigBee), and proprietary standards.
This Dual-Mode RF IP targets by far the lowest power consumption (<3mW) together with state-of-the-art performances (sensitivity, interferers rejection) and with minimal cost.
Thanks to its built-in LDOs, its fully programmable modem and its interface compatible with leading BT baseband controllers, this Dual-Mode RF IP is optimized for easy integration into ASICs and SoCs.
This Dual-Mode RF IP targets by far the lowest power consumption (<3mW) together with state-of-the-art performances (sensitivity, interferers rejection) and with minimal cost.
Thanks to its built-in LDOs, its fully programmable modem and its interface compatible with leading BT baseband controllers, this Dual-Mode RF IP is optimized for easy integration into ASICs and SoCs.
View Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in GF 22nm (Silicon Proven) full description to...
- see the entire Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in GF 22nm (Silicon Proven) datasheet
- get in contact with Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in GF 22nm (Silicon Proven) Supplier
Block Diagram of the Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in GF 22nm (Silicon Proven)
ULP IP
- MIPI D-PHY in TSMC (40nm, 28nm, 16nm, 12nm, 7nm)
- Low frequency XTAL oscillator optimized for low power
- TESIC CC EAL5+ Secure Element IP Core
- USB 2.0 femtoPHY in TSMC (40nm, 28nm, 22nm, 16nm, 12nm, 10nm, 7nm, 6nm)
- Cap-less 104 dB dynamic range ADC with low power mode and ultra low latency capability
- Ultra-low-power 12-bit SAR ADC with lowest voltage