English
You are here:
Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in TSMC22nm ULP
The Ultra-Low-Power DM RF transceiver IP in TSMC22 ULL is designed to meet 2.4 GHz standards like Bluetooth Classic (BR/EDR), Bluetooth Low Energy, 802.15.4 PHY Layer (e.g. ZigBee), and proprietary standards.
This DM IP targets by far the lowest power consumption (<3 mW) together with state-of-the-art performances (sensitivity, interferers rejection) and with minimal cost.
Thanks to its built-in LDOs, its fully programmable modem, and its interface compatible with leading BT baseband controllers, this DM IP is optimized for easy integration into ASICs and SoCs.
This DM IP targets by far the lowest power consumption (<3 mW) together with state-of-the-art performances (sensitivity, interferers rejection) and with minimal cost.
Thanks to its built-in LDOs, its fully programmable modem, and its interface compatible with leading BT baseband controllers, this DM IP is optimized for easy integration into ASICs and SoCs.
View Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in TSMC22nm ULP full description to...
- see the entire Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in TSMC22nm ULP datasheet
- get in contact with Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in TSMC22nm ULP Supplier
Block Diagram of the Bluetooth Dual Mode v5.3 / IEEE 15.4 PHY/RF IP in TSMC22nm ULP
ULL IP
- Audio codec with capacitor-less 106 dB dynamic range ADC and 120 dB SNR DAC with low latency
- Ultra-low quiescent LDO voltage regulator in TSMC 22ULL
- PCIe 2.0 Serdes PHY IP, Silicon Proven in TSMC 22ULP/ULL
- PowerMiser Ultra Low Power Embedded SRAM TSMC 22ULL
- Wi-Fi 802.11 ax/Wi-Fi 6 /Bluetooth LE v5.3/15.4-2.4GHz RF Transceiver IP for IOT Application in TSMC22 ULL
- 24-bit cap-less Audio DAC 120dB SNR low latency