English
eUSB 3.1 Gen 2 Device Controller - Software Enumeration, FIFO Interface
You are here:
Bluetooth LE v5.3 / IEEE 15.4 RF IP in TSMC 40nm & SMIC 55nm (Silicon proven IP)
Bluetooth Low Energy v5.3 and IEEE 802.15.4 (ZigBee 3) compliant RF Transceiver + Modem IP silicon proven in 55 & 40nm ULP, FLASH process nodes.
The radio supports 2Mbps, Long Range and is compliant with Bluetooth® Low Energy Core Configuration (Bluetooth Smart) Version 5.3. The RX and TX currents are optimized to be ~5mA from 0.9V supply.
The IP includes the modem and integrates all the calibrations required for the radio operation in a SOC. The radio analog hard IP including the RF pad-ring occupies less than 0.5sqmm area.
The radio provides best in class RX and TX metrics at highly optimized area and current. Optional integrated RF matching network enabling direct connection to the antennae with minimal loss in performance.
The radio supports 2Mbps, Long Range and is compliant with Bluetooth® Low Energy Core Configuration (Bluetooth Smart) Version 5.3. The RX and TX currents are optimized to be ~5mA from 0.9V supply.
The IP includes the modem and integrates all the calibrations required for the radio operation in a SOC. The radio analog hard IP including the RF pad-ring occupies less than 0.5sqmm area.
The radio provides best in class RX and TX metrics at highly optimized area and current. Optional integrated RF matching network enabling direct connection to the antennae with minimal loss in performance.
View Bluetooth LE v5.3 / IEEE 15.4 RF IP in TSMC 40nm & SMIC 55nm (Silicon proven IP) full description to...
- see the entire Bluetooth LE v5.3 / IEEE 15.4 RF IP in TSMC 40nm & SMIC 55nm (Silicon proven IP) datasheet
- get in contact with Bluetooth LE v5.3 / IEEE 15.4 RF IP in TSMC 40nm & SMIC 55nm (Silicon proven IP) Supplier
ULP IP
- MIPI D-PHY in TSMC (40nm, 28nm, 16nm, 12nm, 7nm)
- Low frequency XTAL oscillator optimized for low power
- TESIC CC EAL5+ Secure Element IP Core
- USB 2.0 femtoPHY in TSMC (40nm, 28nm, 22nm, 16nm, 12nm, 10nm, 7nm, 6nm)
- Cap-less 104 dB dynamic range ADC with low power mode and ultra low latency capability
- Ultra-low-power 12-bit SAR ADC with lowest voltage