English
RivieraWaves 802.11ax (Wi-Fi 6) 1x1 20MHz STA Low Power MAC & modem
You are here:
Core Voltage Regulator
The OT1104 is a CMOS 75mA on-chip core voltage regulator designed for use when a pin for an external decoupling capacitor is not available.
A source follower output stage provides a low impedance at the output at high frequencies, minimizing on chip decoupling requirements for core logic.
A source follower output stage provides a low impedance at the output at high frequencies, minimizing on chip decoupling requirements for core logic.
Features
- Input voltage range 3.0V – 3.3V.
- Output voltage 1.2V or 1.8V ±4%.
- Output short circuit protection.
- Bundled with Obsidian 1.2V bandgap reference.
- Power down/enable input.
- Fast response to current steps.
- 2% DC line and load regulation.
- PSRR 45dB @ 1MHz.
- -40°C to 120°C temperature operation.
- Base cell area 0.02mm2 in 0.18µ CMOS.
Block Diagram of the Core Voltage Regulator IP Core
View Core Voltage Regulator full description to...
- see the entire Core Voltage Regulator datasheet
- get in contact with Core Voltage Regulator Supplier
Core Voltage Regulator IP
- Ultra-low quiescent LDO voltage regulator in TSMC 22ULL
- 100 dB Dynamic Range, 24-bit stereo CODEC with six-channel ADC, digital PWM DAC and a low-noise embedded voltage regulator
- 100 dB Dynamic Range, 16-24-bit six channel audio ADC, with embedded Voice Activity Detector and low-noise voltage regulator
- Linear Voltage Regulator - High Input Voltage (30V), Output Load up to 5mA XFAB 0.35 μm
- Capless LDO voltage regulator (130 nm, 20 mA, excellent load transient)
- 30 mA linear voltage regulator