Scalable, On-Die Voltage Regulation for High Current Applications
Cross-Correlator With 64x2 Channels
Analog signals from inputs ARM1 and ARM2 with the bandwidth from 10 MHz to 500 MHz are passed through the variable gain amplifiers (VGAs) to the 2-bit A/D converters. An automatic gain control (AGC) circuit is using the 2-bit data to adjust the input signal level at the ADC’s input through adjusting the VGA’s gain. The AGC loop controls the VGA gain in such a manner that the average duty cycle of the ADC’s LSB would be equal to 0.7 by default.
The data from the ADC block is passed to the main functional block of the cross-correlator IP – the Cross- Correlation Matrix. This block is responsible for crosscorrelation of 64 2-bit signals from one arm with 64 2-bit signals from another arm. The matrix consists of 4096 crosscorrelation cells, 64 vertical totalizers and 64 horizontal totalizers. The cross-correlation cell (XCC) consists of the multiplication and accumulation blocks. The power consumption of a single correlation cell is minimized to ensure high power efficiency of the IP block.
A Totalizer consists of an array of adder cells which count the number of occurrences of each possible two-bit input values supplied from the A/D converter.
An Output Multiplexer (MUX) performs serializing of the data stored in Cross-Correlation Cells and Totalizer Cells. The I2C Interface is built in for the IP block’s control.
View Cross-Correlator With 64x2 Channels full description to...
- see the entire Cross-Correlator With 64x2 Channels datasheet
- get in contact with Cross-Correlator With 64x2 Channels Supplier