English
You are here:
DDR4/3 PHY in TSMC (16nm, 12nm, 7nm)
The Synopsys DesignWare® DDR4/3 PHY is a complete physical layer IP interface (PHY) solution for enterprise-class ASIC, ASSP, and system-on-chip (SoC) applications requiring high-performance DDR4/DDR3/DDR3L SDRAM interfaces operating at up to 3200 Mbps. The DesignWare DDR4/3 PHY is ideal for systems that require high-speed DDR3/4 performance requiring high capacity memory solutions, typically using registered and load reduced memory modules (RDIMMs and LRDIMMs) with up to 16 ranks. Direct SDRAM on PCB systems are also supported.
Optimized for high performance, low latency, low area, low power, and ease of integration, the DesignWare DDR4/3 PHY is provided as a hard DDR PHY that is primarily delivered as GDSII including integrated application-specific DDR4/3 I/Os. Supporting the GDSII-based PHY is the RTL-based PHY Utility Block (PUB) that includes PHY control features such as read/write leveling, data eye training, per-bit data deskew control, PVT compensation, and support for production testing of the DDR4/3 PHY. The PUB also includes an embedded calibration processor to execute hardware-assisted, firmware-based training algorithms. The DDR4/3 PHY includes a DFI 4.0 interface to the memory controller and can be combined with Synopsys’ Enhanced Universal Memory (uMCTL2) or Protocol (uPCTL2) controllers for a complete DDR interface solution.
Optimized for high performance, low latency, low area, low power, and ease of integration, the DesignWare DDR4/3 PHY is provided as a hard DDR PHY that is primarily delivered as GDSII including integrated application-specific DDR4/3 I/Os. Supporting the GDSII-based PHY is the RTL-based PHY Utility Block (PUB) that includes PHY control features such as read/write leveling, data eye training, per-bit data deskew control, PVT compensation, and support for production testing of the DDR4/3 PHY. The PUB also includes an embedded calibration processor to execute hardware-assisted, firmware-based training algorithms. The DDR4/3 PHY includes a DFI 4.0 interface to the memory controller and can be combined with Synopsys’ Enhanced Universal Memory (uMCTL2) or Protocol (uPCTL2) controllers for a complete DDR interface solution.
View DDR4/3 PHY in TSMC (16nm, 12nm, 7nm) full description to...
- see the entire DDR4/3 PHY in TSMC (16nm, 12nm, 7nm) datasheet
- get in contact with DDR4/3 PHY in TSMC (16nm, 12nm, 7nm) Supplier
Video Demo of the DDR4/3 PHY in TSMC (16nm, 12nm, 7nm)
SDRAMs such as DDR, LPDDR, and HBM offer unique advantages for automotive, artificial intelligence (AI), cloud, and mobile applications. However, the selected memory solution impacts the performance, power, and area requirements of SoCs, making it important to choose the right memory technology and interface IP for the target design. Meet your specific design targets by using Synopsys’ high-performance, silicon-proven DDR memory interface IP solutions compliant with the latest JEDEC standards.