English
High Performance Second Generation Extended MIPI CSI2 Receiver
You are here:
Digital Oscillator
The S3OSC100MT55ULP is a low power consumption oscillator centred on 100MHz output frequency. The oscillator achieves ±5% accuracy after trimming. A 5-bit digital bus allows frequency calibration against process/temperature variations.
This oscillator requires a reference current to stabilise the output frequency against temperature and power supply variations. On a particular die the Oscillator delivers a ±5% accuracy across VT.
This oscillator requires a reference current to stabilise the output frequency against temperature and power supply variations. On a particular die the Oscillator delivers a ±5% accuracy across VT.
Features
- 55nm TSMC ULP eFlash , 6 Metals Used with Deep-Nwell
- 2.5V and 1.2V Supply
- Operating Frequency Range: 85 115MHz
- Frequency Accuracy after Trimming ±5%
- Current Consumption 300μA @100MHz
- Cycle to Cycle Jitter ±250ps
- Duty Cycle 40% to 60%
- Compact Die Area 0.024mm2
- Power Down Mode
Benefits
- The S3OSC100MT55ULP is readily portable to any similar manufacturing process or can be customised for specific customer requirements
Deliverables
- Datasheet
- Characterization Report
- Flat Netlist (cdl)
- Layout View (gds2)
- Abstract View (lef)
- Timing View (lib)
- Behavioural Model (Verilog .v)
- Integration Guidelines and Support
- *Subject to Agreement
Applications
- Clock
- Timing
View Digital Oscillator full description to...
- see the entire Digital Oscillator datasheet
- get in contact with Digital Oscillator Supplier