English
You are here:
Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications
RFFEM01C Front End Module operates from 24 – 30 GHz and can be used in low power Ka band application. The input and output are matched to 50 ohms with on-chip DC blocking capacitors. The device is specifically designed to use in point-to-point radios for 5G RF Transceiver & SATCOM. The technology used to design front-end module is 0.1um GaAs pHEMT process. Results are shown in datasheet with all parasitics & coupling effects at desired frequency.
View Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications full description to...
- see the entire Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications datasheet
- get in contact with Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications Supplier
Block Diagram of the Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications
Front End Module IP
- Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications.
- Front -End Module 71-86GHz
- GaAs p-HEMT Monolithic integrated transceiver Front End Module suitable for 802.11b/g (2.4GHz) application
- Current Input Analogue Front End with Programmable Gain Amplifier (PGA) and Fully Differential Voltage Output, TSMC 180nm
- Current Input Analogue Front End with Digital Control and SPI Interface, TSMC 180nm
- Current Input Analogue Front End with 13-bit ADC, TSMC 180nm