MIPI C-PHY v1.2 D-PHY v2.1 RX 2 trios/2 Lanes in TSMC (16nm) for Automotive
GLONASS/GPS/Galileo/BeiDou multisystem single-band 2-channel receiver RFIC
Highly configurable, RFIC can deliver different clock frequencies and provide either analog or digital output using onboard ADC circuits. This, alongside with configurable output CMOS level, makes the circuit compatible with many available baseband ICs.
Integrated stabilized voltage sources for TCXO, external LNA and active antenna alongside with integrated IF and PLL filters make the device easy to use with minimum external components. RFIC can be delivered in three variants: 6x6mm QFN40 or 5x5mm QFN32 packages, or unpackaged, in dies for SiP implementation.
IC is fabricated on SMIC CMOS 0.18 um technology.
View GLONASS/GPS/Galileo/BeiDou multisystem single-band 2-channel receiver RFIC full description to...
- see the entire GLONASS/GPS/Galileo/BeiDou multisystem single-band 2-channel receiver RFIC datasheet
- get in contact with GLONASS/GPS/Galileo/BeiDou multisystem single-band 2-channel receiver RFIC Supplier
GPS IP
- GNSS (GPS, Galileo, GLONASS, Beidou3, QZSS, SBAS) Ultra-low power RF Receiver IP
- L1 GPS/Galileo/BeiDou/GLONASS and FM/VHF/UHF/L/S/DVB -T/H/SH RF Front-end
- L1 GPS/Galileo/BeiDou/GLONASS RF Front-end
- L1 GPS/Galileo/GLONASS RF Front-end
- RF and Analog GPS/GNSS Front End for GPS, GLONASS, Galileo and Beidu
- GPS/Galileo/GLONASS System on Chip based on "Leon 3" CPU