PCIe 5.0 Controller supporting Endpoint, Root Port, Switch, Bridge and advanced features
I2C and SPI Master/Slave Controller
In SPI mode, the I2CSPI-CTRL controller can operate as either a controller (master) or target (slave), offering full-duplex communication. In master mode, it initiates data transfers and controls the clock (SCK), while in slave mode, it operates under the control of an external master device. The I2CSPI-CTRL supports configurable clock polarity and operates in the four standard SPI modes (0, 1, 2, 3).
In I2C mode, the I2CSPI-CTRL supports standard and fast mode with transfer rates of up to 400khz, with both 7-bit and 10-bit addressing. It can function as either a master or a slave, with the capability to manage multiple addressing modes and clock stretching. In master mode, the I2CSPI-CTRL initiates communication, sends addresses, and manages data transfer timing. In slave mode, it responds to addresses sent by an external master, acknowledges reception, and sends data upon request. The I2CSPI-CTRL also supports general call addressing and SMBUS protocols, making it suitable for various applications.
The I2CSPI-CTRL core is designed for ease of use and integration and adheres to the industry’s best coding and verification practices. The core’s control and status registers (CSR) are accessed through a 32-bit AMBA® APB interface. The design contains no latches or tri-states and is fully synchronous with a single clock domain making technology mapping straightforward. The I2CSPI-CTRL core is rigorously verified and silicon-proven. It is available in LINT-clean System Verilog source code or as a targeted FPGA netlist. Its deliverables include a testbench, comprehensive documentation, and sample simulation and synthesis scripts.
View I2C and SPI Master/Slave Controller full description to...
- see the entire I2C and SPI Master/Slave Controller datasheet
- get in contact with I2C and SPI Master/Slave Controller Supplier