English
You are here:
I2C I/O Pad Set
The I2C libraries provide the bidirectional I/O for two-line serial communication per Rev. 4 of the I2Cbus industry specification. The design is compatible with Standard-mode, Fast-mode, and Highspeed mode I 2C operating modes.
Deliverables
- a. Physical abstract in LEF format (.lef)
- b. Timing models in Synopsys Liberty formats (.lib and .db)
- c. Calibre compatible LVS netlist in CDL format (.cdl)
- d. GDSII stream (.gds)
- e. Behavioral Verilog (.v)
- f. Layout Parasitic Extraction (LPE) SPICE netlist (.spice)
- g. Databook (.pdf)
- h. Library User Guide - ESD Guidelines (.pdf)
View I2C I/O Pad Set full description to...
- see the entire I2C I/O Pad Set datasheet
- get in contact with I2C I/O Pad Set Supplier
I2C
- APB I2C master and slave
- I2C Bus Interface - Master with FIFO
- A 28nm Wirebond IO library with dynamically switchable 1.8V/ 3.3V GPIO, 5V I2C open-drain, 1.8V & 3.3V analog, OTP program cell, and HDMI & LVDS protection macros - featured across a variety of metal stack and pad configuration options
- A 22nm Wirebond IO library with dynamically switchable 1.8V/3.3V GPIO, 3.3V I2C open-drain, & analog cells
- A 65nm Wirebond IO library with 1-3.3V GPIO, 3.3V pulse-width modulation cell, I2C & SVID open-drain, 3.3V & 5V analog and OTP program cell
- A 130nm Wirebond IO library with 3.3V GPIO, LVDS TX & RX, 3.3V I2C open-drain, analog cell and OTP program cell