PCIe 5.0 Controller supporting Endpoint, Root Port, Switch, Bridge and advanced features
I2C IO Pad Set
Features
- Product Features
- • Supported I2C operating modes:
- o Standard-mode (Sm) – 100 Kbps data rate
- o Fast mode (Fm) – 400 Kbps data rate
- o Fast mode (Fm+) – 3.4 Mbps data rate
- • Open drain operation only (floating NWELL with PMOS
- used for ESD protection only)
- • Built-in output slew rate control to meet I2C Tof minimum of
- (20 x VDDP/5.5V) ns
- • Output enable
- • Receiver enable
- • ESD protection uses snap-back devices (no diode to the
- positive power supply)
- • Standard LVCMOS compatible inputs with Schmitt trigger
- (hysteresis) option
- • Power-on sequencing independent design with Power-On
- Control
- • DVDD = 2.7V to 3.63V
- • Pad VDDP (power supply reference for Output) = 2.7V to
- 3.63V, limited to VDVDD.
- • The circuit consumes no DC supply current in the static state
View I2C IO Pad Set full description to...
- see the entire I2C IO Pad Set datasheet
- get in contact with I2C IO Pad Set Supplier
I2C IP
- DO-254 I2C Master Serial Interface Controller 1.00a
- TSMC based IO & ESD solutions supporting GPIO, I2C,RGMII, SD, LVDS, HDMI & analog/RF across multiple technology nodes
- A 28nm Wirebond IO library with dynamically switchable 1.8V/ 3.3V GPIO, 5V I2C open-drain, 1.8V & 3.3V analog, OTP program cell, and HDMI & LVDS protection macros - featured across a variety of metal stack and pad configuration options
- A 16nm/12nm Flip-Chip IO library with dynamically switchable 1.8V/3.3V GPIO, 5V I2C open-drain, 5V OTP and 1.8V / 3.3V analog
- A 22nm Wirebond IO library with dynamically switchable 1.8V/3.3V GPIO, 3.3V I2C open-drain, & analog cells
- Open-drain I2C and SMBUS, DDC, CEC & HPD IO offerings in TSMC Technologies