English
USB 3.2 Gen2x2 with PIPE 4.3 and USB2.0 with UTMI+ interface
You are here:
I2C Slave Serial Interface Controller
Slave serial interface compatible with the popular Philips® I2C standard. Permits an I2C Master to communicate with your FPGA, CPLD or ASIC device.
Auto-detects standard (100 kbits/s), fast (400 kbits/s) and custom data rates up to 4Mbits/s. Features a simple command interface and fully configurable slave addressing.
Auto-detects standard (100 kbits/s), fast (400 kbits/s) and custom data rates up to 4Mbits/s. Features a simple command interface and fully configurable slave addressing.
View I2C Slave Serial Interface Controller full description to...
- see the entire I2C Slave Serial Interface Controller datasheet
- get in contact with I2C Slave Serial Interface Controller Supplier
Block Diagram of the I2C Slave Serial Interface Controller
I2C IP
- DO-254 I2C Master Serial Interface Controller 1.00a
- TSMC based IO & ESD solutions supporting GPIO, I2C,RGMII, SD, LVDS, HDMI & analog/RF across multiple technology nodes
- A 28nm Wirebond IO library with dynamically switchable 1.8V/ 3.3V GPIO, 5V I2C open-drain, 1.8V & 3.3V analog, OTP program cell, and HDMI & LVDS protection macros - featured across a variety of metal stack and pad configuration options
- A 16nm/12nm Flip-Chip IO library with dynamically switchable 1.8V/3.3V GPIO, 5V I2C open-drain, 5V OTP and 1.8V / 3.3V analog
- A 22nm Wirebond IO library with dynamically switchable 1.8V/3.3V GPIO, 3.3V I2C open-drain, & analog cells
- A 65nm Wirebond IO library with 1-3.3V GPIO, 3.3V pulse-width modulation cell, I2C & SVID open-drain, 3.3V & 5V analog and OTP program cell