LC3 / LC3plus Bluetooth LE Audio Codecs for Arm Cortex M55
Packetcraft LC3 supports demanding audio use cases running multiple codec instances on a single processor, without requiring a dedicated DSP. LC3 is part of the overall LE Audio solution offered by Packetcraft, and when combined with Packetcraft Host and Packetcraft Controller, licensees receive a comprehensive, fully-integrated Bluetooth LE Audio solution from a single software supplier.
Packetcraft LC3 is highly optimized for Arm® Cortex® processors and can be used with your preferred Bluetooth SoC complemented with exceptional engineering support.
Also available is Packetcraft LC3 Tester, a companion test tool which allows the Packetcraft LC3 codec to be validated, characterized, and qualified on a target hardware platform.
View LC3 / LC3plus Bluetooth LE Audio Codecs for Arm Cortex M55 full description to...
- see the entire LC3 / LC3plus Bluetooth LE Audio Codecs for Arm Cortex M55 datasheet
- get in contact with LC3 / LC3plus Bluetooth LE Audio Codecs for Arm Cortex M55 Supplier
Block Diagram of the LC3 / LC3plus Bluetooth LE Audio Codecs for Arm Cortex M55
Bluetooth IP
- Ceva-Waves Bluetooth 5.4 Low Energy Baseband Controller / Link Layer, software and profiles
- Bluetooth 5.4 LE Controller with Link Layer, optional 802.15.4 MAC, early access to Channel Sounding
- Ceva-Waves Bluetooth 5.3 Low Energy Baseband Controller, software and profiles
- Multi-protocol wireless plaform integrating 802.11ax (Wi-Fi 6), Bluetooth 5.4 Dual Mode, 802.15.4 (for Thread, Zigbee and Matter)
- Bluetooth low energy v6.0 Baseband Controller, Protocol Software Stack and Profiles IP
- Bluetooth Dual Mode v5.4 / IEEE 15.4 PHY/RF IP in TSMC22nm ULP