English
1.8V Fault Tolerant General Purpose I/O Staggered Pad Set in GLOBALFOUNDRIES 22nm
You are here:
Low Drop Out 20mA Regulator
The Low Drop Out 20mA Regulator has been designed to provide 2.5V with a load current of up to 20mA. The output voltage can also be increased to 2.7V.
The Low Drop Out 20mA Regulator features an automatic feedback sensing option to maintain a constant regulated output voltage level. It has been designed to provide a stable output in both low-drop and high-drop operation, while maintaining minimum ripple on supply lines in the presence of large load current spikes inherent with switching loads, e.g. high-speed ADCs.
The Low Drop Out 20mA Regulator has been designed to minimize the area, while allowing 5V tolerant feature using only standard 1.8V/3.3V devices. To achieve these goals, the Regulator requires a 4.7uF external ceramic capacitor.
The circuit can be scaled for a range of load currents and the output voltage level can be programmable.
For maximum flexibility, the user can adjust the regulated output voltage if the Low Drop Out 20mA Regulator is placed on a different chip.
The Regulator is readily portable to other manufacturing processes or can be customised for specific customer requirements.
The Low Drop Out 20mA Regulator features an automatic feedback sensing option to maintain a constant regulated output voltage level. It has been designed to provide a stable output in both low-drop and high-drop operation, while maintaining minimum ripple on supply lines in the presence of large load current spikes inherent with switching loads, e.g. high-speed ADCs.
The Low Drop Out 20mA Regulator has been designed to minimize the area, while allowing 5V tolerant feature using only standard 1.8V/3.3V devices. To achieve these goals, the Regulator requires a 4.7uF external ceramic capacitor.
The circuit can be scaled for a range of load currents and the output voltage level can be programmable.
For maximum flexibility, the user can adjust the regulated output voltage if the Low Drop Out 20mA Regulator is placed on a different chip.
The Regulator is readily portable to other manufacturing processes or can be customised for specific customer requirements.
Features
- 180nm TSMC Logic Process
- No Analog Options
- 6 Metals Used
- 1.8V/3.3V Devices Only
- 3.15V – 5V Input Voltage
- 2.5V/2.7V Output Voltages
- 20mA Load Current
- Compact Die Area
- Power Down Mode
Applications
- High PSRR, Low Noise Low Drop Out Voltage Regulator
Block Diagram of the Low Drop Out 20mA Regulator IP Core
View Low Drop Out 20mA Regulator full description to...
- see the entire Low Drop Out 20mA Regulator datasheet
- get in contact with Low Drop Out 20mA Regulator Supplier
LDO Regulator
- 40nm 1.8V Programmable 1.1V LDO Regulator with 50mA max. output
- Capless LDO voltage regulator (TSMC 130 nm, 20 mA, excellent load transient)
- LDO Differential Feedback Capless Linear Regulator Series( Vin = 1.8-5.5V; Vo = 0.6-3.6V; Io = 20mA ) - TSMC 55nm
- LDO Differential Feedback Capless Linear Regulator Series( Vin = 1.8-5.5V; Vo = 0.6-3.6V; Io = 50mA ) - TSMC 40nm
- LDO Differential Feedback Capless Linear Regulator Series( Vin = 1.8-5.5V; Vo = 0.6-3.6V; Io = 50mA ) - TSMC 55nm
- 10mA, Capless High PSRR LDO Regulator for RF and Analog Applications in TSMC 28nm