English
You are here:
MIPI D-PHY 1.5Gbps (4-lanes RX) TSMC 28HPM
The IP for MIPI D-PHY is compliant with the MIPI Alliance Specification for D-PHY, version 1.1, and is implemented as a separate transmitter and receiver blocks that support high-speed (HS) and low-speed (LS) signaling. Transfer speeds up to 1.5Gbps per lane in HS mode and up to 10Mbps in LS mode are supported. The receiver block also supports low-power contention detection (LP-CD).
The Cadence IP for MIPI D-PHY is flexible, low-cost, high-speed serial interface solution designed to interconnect components inside a mobile device. Design IP for MIPI D-PHY extends the interface bandwidth, enabling more advanced applications with very low power consumption through differential signaling schemes.
The Cadence IP for MIPI D-PHY is flexible, low-cost, high-speed serial interface solution designed to interconnect components inside a mobile device. Design IP for MIPI D-PHY extends the interface bandwidth, enabling more advanced applications with very low power consumption through differential signaling schemes.
View MIPI D-PHY 1.5Gbps (4-lanes RX) TSMC 28HPM full description to...
- see the entire MIPI D-PHY 1.5Gbps (4-lanes RX) TSMC 28HPM datasheet
- get in contact with MIPI D-PHY 1.5Gbps (4-lanes RX) TSMC 28HPM Supplier
MIPI D-PHY IP
- MIPI CSI-2 Controller Core
- MIPI D-PHY IP for TSMC (5nm, 6/7nm, 12/16nm, 22nm, 28nm, 40nm)
- MIPI CSI DSI C-PHY IP for TSMC (5nm, 6/7nm, 12/16nm, 22nm, 28nm, 40nm)
- MIPI DSI Receiver Controller v1.3
- MIPI DSI Transmit Controller v1.3
- MIPI CSI-2 controller Receiver v 2.1, Compatible with MIPI C-PHY v1.2 & DPHY v2.1.