English
24-bit/-140 dB THD+N Multi-Channel Audio Async Sample Rate Converter
You are here:
MIPI D-PHY CSI-2 TX in GlobalFoundries 22FDX
The MXL-DPHY-CSI2-TX is a high-frequency low-power, low-cost, source synchronous, Physical Layer supporting the MIPI Alliance Specification for
D-PHY v2.1, which is backward compatible with MIPI Specification for
D-PHY v1.2. The IP is configured as a MIPI master optimized for CSI-2SM
(Camera Serial Interface) applications.
The High-Speed signals have a low voltage swing, while Low-Power signals have large swing. High-Speed functions are used for high-Speed data traffic while low power functions are mostly used for control.
D-PHY v2.1, which is backward compatible with MIPI Specification for
D-PHY v1.2. The IP is configured as a MIPI master optimized for CSI-2SM
(Camera Serial Interface) applications.
The High-Speed signals have a low voltage swing, while Low-Power signals have large swing. High-Speed functions are used for high-Speed data traffic while low power functions are mostly used for control.
View MIPI D-PHY CSI-2 TX in GlobalFoundries 22FDX full description to...
- see the entire MIPI D-PHY CSI-2 TX in GlobalFoundries 22FDX datasheet
- get in contact with MIPI D-PHY CSI-2 TX in GlobalFoundries 22FDX Supplier
Block Diagram of the MIPI D-PHY CSI-2 TX in GlobalFoundries 22FDX
MIPI D-PHY IP
- MIPI D-PHY in TSMC (40nm, 28nm, 16nm, 12nm, 7nm)
- MIPI CSI-2 Transmitter v 2.1, Compatible with MIPI C-PHY v1.2 & DPHY v2.1.
- MIPI C-PHY-D-PHY Combo PHY IP on TSMC 28nm HPC+
- MIPI C-PHY/D-PHY Combo IP Universal, 4.5Gsps/4.5Gbps in TSMC 22ULP
- MIPI D-PHY Universal Lane 16FFC IP for Automotive
- MIPI D-PHY Universal Tx / Rx v1.1 @1.5ghz Ultra Low Power for IoT & Wearables