ONFI 3.0 NV-DDR2 PHY

Features

• Compliant to ONFI revision 3.2 standard
• Supports NV-DDR2 mode of operation supporting up to 266MHz or 566MT/s
• Supports NV-DDR mode of operation supporting up to 100MHz
• Supports legacy Asynchronous devices operating from 10MHz to 50MHz
• Can be used with any other ONFI digital controller
• Includes 1.8V/3.3V operation I/O pads complaint to ONFI 3.2, ONFI 3.1, ONFI 2.3, ONFI 2.0
• Contains a PLL to support all frequencies from 10MHz to 200MHz
• Uses 2X clock for better timing
• Contains a DLL to align the DQS for better noise margin and immune to PVT variations
• Supports differential signaling of DQS and RE signals
• Supports 4 levels of drive strength as mentioned in the ONFI 3.2 Standard

Benefits

• Proven and robust high performance ONFI 3.2 NV-DDR2 PHY delivered in hard marco
• Offered as a Total IP solution including RTL Host Controller IP, Verification IP and ESL models, Software Stack, and Hardware Development Platform
• Arasan Chip Systems is the leading supplier of mobile storage IP and its products are used by most first tier memory suppliers. Extensive experience and compliance testing with all versions of this specification make the choice of Arasan products the lowest risk approach to implementation of ONFI NAND flash enabled products.
• Arasan’s development engineering team provides direct support to customers insuring that the highest level of knowledge is immediately available to the customer thus reducing problem resolution time.

Deliverables

• The full IP package complete with:
• Graphic Design System II (GDSII) database
• Layout Versus Schematic (LVS) Netlist
• Physical Abstract Model (LEF)
• Behavioral Models
• Design Integration Guide
• Technical Documentation

Block Diagram of the ONFI 3.0 NV-DDR2 PHY

• see the entire ONFI 3.2 NV-DDR2 PHY in GDSII datasheet
• get in contact with ONFI 3.2 NV-DDR2 PHY in GDSII Supplier